Table of Contents
Advertisement
6. Disengagethecablefromthetabsholdingitdown,thenremovethepnnt
head.
7. Foreasy instaUationofthenewpnnthead, movethecarriagetowardthe
left end of the rail.
8. Place the new printhead on its support,seatingit on the two pins.
9. 'ITuead thenewcablethe samewayas theold, securingitunderthe three
tabs on the printhead carnage.
10.Plug the cable into the connector,insertingit as far as it will go.
11.Fasten the printhead down with the two screws.
12.Movethecarnagebacktowardtherightandreplacetheconnectorcover.
Slidethe connectorcoverto the left untilit locks into place.
13.Replacetheribboncartridgeandtopcover,andplugthepowercordback
in.
97
Advertisement
Table of Contents
