Form Feed Before Local Screen Copy - Epson C82314* User Manual

NOTES: This command defines the default paper source for the Page
Presentation Media (PPM) Host command in SCS mode. If the PPM
command is received from the host, the interface always sends the
SCS mode paper source command to the printer unless values 0 or 1
are selected. If the printer does not have a secondary paper bin or
anenvelope feeder, it ignores the command, but it will be used for
Commands 62-64 logic.
If manual sheet feed is specified in the SCS PPM command and no
paper is installed in the manual feed slot, the printer will wait for the
operator to insert perhaps letter head or a special form before printing
continues.
If this command is placed as the first printable data on the page, (line
1, position 1) the specified paper path will take effect immediately. If
the command is placed at any other position on the page, the change
will have effect on the next page.
EXAMPLE: &%Z11,5
COMMAND 12: FORM FEED BEFORE LOCAL SCREEN COPY
Specifies whether a Form Feed is performed before-doing local screen hard
copy.
VALUE DESCRIPTION
* 0
1
NOTES: This command only affects the local screen copy function, not the
host-initiated local copy printing.
Functions only in non-SCS operations
EXAMPLE: &%Z12,1
Selects manual sheet feed default source for paper
No Form Feed before local screen hard copy
Form Feed performed before local screen hard copy
Performs a FF before local screen copy
A-7