Epson C82314* User Manual page 40

COMMAND 38: TRUE LPI SPACING (LASER)
Because laser printers have a non-printable border around the edge of single-
sheet pages, 6-LPI and 8-LPI spacing is compressed slightly to enable 66 lines
and 88 lines to be printed on 11-inch long paper. This can occasionally cause
a problem, especially with preprinted forms. Command 38 enables a user to
override the normal laser printer LPI compression.
VALUE DESCRlPTlON
*0
1
NOTE: If true LPI is selected, the user needs to adjust the document formats
to allow for the reduced number of lines that can be printed per page;
otherwise, blank pages are ejected by the laser printer because of
blank line feeds that do not fit on the reduced page size. (Refer to the
laser printer' s operator' s manual.)
EXAMPLE: &%Z38,1
COMMAND 40: ALTERNATE DELIMITER CHARACTERS
Specifies two characters in addition to &% which can be used for the ' delimiter'
characters for Command-Pass-Thru and Host Download Commands.
VALUE DESCRIPTION
0000
XXYY
EXAMPLE: &%Z40,253F Specifies the %? characters as the alternate
Compress the vertical LPI spacing
Print using true 6 and 8 LPI spacing
Specifies that vertical spacing prints using true 6 and
8 LPI. For an 11" page, 63 lines at 6 LPI or 84 lines
at 8 LPI are the maximum that fit on a page
Deletes previously selected alternate characters
XX is the ASCII HEXADECIMAL value of the first character
and YY is the ASCII HEX value of the second character.
' delimiter' characters, % ASCII hex value is 25 and ?
ASCII hex value is 3F in this example.
A-16