Epson C82314* User Manual page 37

VALUE DESCRIPTION
*0
1
NOTES: The time-out value is the same as the time-out used to switch between
host and alternate host printer sharing. (See Command 51)
Generally, the host application generates a termination FF, and there
is no need to change this command from the default.
In duplex printing, the last page will be ejected.
EXAMPLE: &%Z27,1
COMMAND 31: TRUNCATE/WRAP SELECT
The user can select whether the interface truncates or wraps the text if the
maximum print position is exceeded.
VALUE DESCRIPTION
* 0
1
EXAMPLE: &%Z31,1
COMMAND 32: PAPER SIZE (LASER)
Specifies the paper size used for printing
VALUE DESCRIPTION
*0
1
2
EXAMPLE: &%Z32,1
No extra FF is sent
Send FF after time out value
Sends FF after time delay selected by command 51
(default = 10 sec.) when unprinted data remains in
the print buffer.
Allow text to print on next line when maximum print position
is exceeded.
Truncate text beyond the maximum print position
Causes text which exceeds the maximum print
position to be lost.
Selects 8 1/2" X 11" letter paper
Selects 210mm X 297mm (8.27' X 11.69" ) A-4 paper
Selects 8 1/2" X 14" legal paper
The interface tells the printer to use A-4 paper.
A-13