Appendix B. Push Button Setup - Epson C82314* User Manual

APPENDIX B: PUSH BUTTON SETUP
Push button (Yes / No) setup provides an alternate method for a user to select the
basic configuration selections for the printer emulation. Selections can also be
changed by the Host Download Configuration Commands as specified in
Appendix A which has more detailed information on the selections.
Push button setup is selected by performing a self test and at the end of the self
test print out the last line of printing will have the question: ' Do you want to do
push button set up?' Press the PA1 push button to answer the question"Yes".
Press the PA2 push button to answer the question " No' , or simply turn off the
printer to discontinue push button setup.
NOTE:
A detailed example of the Push Button Setup printout is as follows:
1920 = Logical Buffer Size
2 5 6 0 = Logical Buffer Size
3 5 6 4 = Logical Buffer Size
3440 = Logical Buffer Size
= Logical Buffer Size
960
1 9 2 0 = Logical Buffer . ..(Sequence repeats until a ' No' response is given)
A " Yes' response causes the next selection in the option group to be substituted
into the printed statement with a similar Yes / No response requested. When the
' No' button is pushed, the current configuration selection remains and the
selection jumps to the next configuration setup option group. The selections are
For reference, your ' Yes' or " No' response is printed
before the next option statement is printed. Some
printers may require you to line feed the paper to a
position where the printed text can be read.
laser printer, it is necessary to form feed a page to
read the printed output.
Do you want this changed? (Yes I No)
Do you want this changed? (Yes / No)
Do you want this changed? (Yes / No)
Do you want this changed? (Yes / No)
Do you want this changed? (Yes / No)
B-l
On a
Yes
Yes
Yes
Yes
Yes