Table of Contents
Advertisement
Hardware Installation
2-3 QUICK BIOS SETUP
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will be shown
on the screen. Then, follow these steps to configure the CPU settings.
Select [STANDARD CMOS SETUP]
Step1.
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
"Auto".
Select [LOAD OPTIMIZED DEFAULTS]
Step2.
Select the "LOAD OPTIMIZED DEFAULTS" menu and type "Y" at the
prompt to load the BIOS optimal setup.
Select [SAVE & EXIT SETUP]
Step3.
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.
SY-P4I845PEISA/GEISA
37
Hide quick links:
Advertisement
Table of Contents
