Atx Power - SOYO SY-P4I845PEISA User Manual

Hardware Installation
The Motherboard requires a power supply with at least 350 Watts and a
"power good" signal. Make sure the ATX power supply can take at 1.5 A
max current * load on the 5V Standby lead (5VSB) to meet the standard
ATX specification.
* Note: If you use the Wake-On-LAN (WOL) function, make sure the ATX
12V power supply can support at least 720 mA on the 5V Standby lead
(5VSB).
Please install the ATX power according to the following pin assignment:

ATX Power

12V
5VSB
PW-OK
GND
5V
GND
5V
GND
3.3V
3.3V
Pin1 Pin3
COM
COM
+12V Power Connector
5V
5V
-5V
Pay special care to the directionality.
GND
GND
GND
PS-ON
GND
-12V
3.3V
+12VDC
+12VDC
SY-P4I845PEISA/GEISA
33