Hardware Installation
Onboard LAN LED Definition
When this LED is
lit, this means the
LAN is running at
100 mbps, if it is not
lit, the Onboard
LAN is working at
10 mbps.
Step 5 Power On
You have now completed the hardware installation of your Motherboard
successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the <DEL> key while the system is
performing the diagnostic checks,
Line-out
Line-in
35
SY-P4I845PEISA/GEISA
Mic-in
This is the LAN
activity LED. It will
blink when it is
active.