Epson User Manual page 31

Chapter 2
Running SETUP and Installing Drivers
If you've added options or you want to customize your
computer, you can use a configuration program called SETUP,
which is contained within the BIOS on the system board.
SETUP allows you to change the settings for your hardware
configuration, security options, and power-saving features. The
configuration information you enter is stored in the computer's
ROM (read-only memory) and is backed up by a battery, so it is
not erased when you turn off or reset your computer.
You may also want to install drivers and utilities for the built-in
PCI IDE interfaces and the built-in PCI local bus video
interface. You only need to install these drivers if you're using
an operating system other than Windows.
This chapter describes the following procedures:
Starting the SETUP program
Using the System Setup option to set basic system functions
Using the Fixed Disk Setup option
Using the Advanced System Setup options
Setting the Boot options
Selecting the Security and Anti-Virus options
Using the Green PC features
Exiting SETUP
Installing the PCI IDE drivers
Installing video drivers.
Running SETUP and Installing Drivers
2-1