Backing Up The Vga Utilities; Using The Password Function - Epson ActionNote 4SLC2-50 User Manual

Backing Up the VGA Utilities

Your computer comes with VGA drivers and utilities already
loaded on the hard disk. To protect these important files, you
should back them up onto a diskette. The files are located in the
\VGAUTILS directory.
Follow these steps to backup your VGA drivers and utilities:
1. Insert a blank, formatted diskette in the diskette drive.
2. Log onto the C:\VGAUTILS directory.
3. Type the following and press
C O P Y * . *
See your MS-DOS documentation for more information about
copying files. For information on using the VGA utilities and
installing the drivers, see Chapter 6.

Using the Password Function

The ActionNote provides password security for the entire system
or only the Setup program. This allows you to safeguard all your
data or only your Setup configuration. The password function is
optional and you do not have to set a password if you don't want
to use one.
You use the Setup program to first enable or disable a password
and then define it. (See Chapter 5 for instructions.)
If you enable the power-on password, you must enter it each time
you turn on or reset your computer. (Resetting the computer is
described later in this chapter.) The computer prompts you for the
password after it completes its power-on diagnostics.
Enter
A :
Using Your Computer 2-3