Changing Language Settings
You can use the
Language
you to make this selection.
1. When a DVD is not playing, press the
Setup menu:
LANGUAGE
2. Press
to highlight the setting you want, then press
3. Press
to select the language you want, then press
code definitions, see page 67.
4. To return to the previous menu level, press
Adjusting the Resume and On-Screen Guide Settings
1. When a DVD is not playing, press the
2. Press
to highlight
3. Press
to highlight
selection box.
ON/OFF
4. Press
to select the setting you want, then press
■ RESUME:
This setting defines the way playback resumes after pausing. To have
playback resume from the point where it was stopped, set to
have playback start from the beginning of the chapter, set to
■ ON SCREEN GUIDE:
indicator on the screen when you pause, resume, or use other playback controls.
Select OFF if you don't want these indicators to be displayed.
5. To return to the previous menu level, press
Setup menu to change the default language for DVDs that allow
button on the remote control. You see the
button on the remote control.
and display the
OTHERS
or
RESUME
ON SCREEN GUIDE
This setting, which is
to display a list of languages.
to save it. For a list of language
.
Setup menu.
, then press
to save it.
ON
OFF
by default, briefly displays an
ON
.
Doing More with MovieMate
to display the
(the default). To
.
41