Download Print this page

Epson PowerLite 30C Quick Setup Manual

Epson multipurpose entertainment projector quick setup
Hide thumbs Also See for PowerLite 30C:

Advertisement

Quick Links

Multipurpose Entertainment Projector
1

Unpack the projector

Your projector comes with the following items:
Projector
Cinema filter
Remote control
Note:
To use your User's Guide on the CD-ROM, open the folder labeled
English, then open the file named UserGuide.pdf with Acrobat
If you don't have Acrobat Reader, open the folder labeled Acrobat Reader
and install it.
2
Connect your video source
The projector has 3 video connectors, as shown below. Each one requires a different
type of cable (a computer cable is included). You can connect up to 3 video devices
(including a computer) and use the remote control to switch between them.
1
Check the connectors on your video equipment. If more than one connection
is available, choose the one that provides the best quality. (The projector
connectors from lowest to highest quality are Video [composite video],
S-Video, and Computer/Component Video.)
2
Make sure you have the right cable(s) for the connection(s) you want to use,
and the cables are long enough for your setup. If you need a cable longer
than the standard 6 to 10 ft, you may need a distribution amplifier.
3
Before you connect your equipment, make sure everything is turned off.
4
Connect your video equipment to the projector.
RC A video cable
(composite video)
S-Video cable
Audio
Video
S-Video
Control(RS-232C)
EPSON
®
PowerLite

Quick Setup

Power cord
Computer cable
User's Guide CD-ROM
®
Reader.
Component
Computer cable
video to VGA cable
or VGA computer cable
(included)
Audio
Computer/
Monitor
Component Video
Out
®
30c
The projector supports 4 viewing setups. Choose the best one for your home theater
environment. If you install the projector in a rear or overhead position, you'll need
to choose the correct projection option, identified below, from the Advanced menu.
Follow the instructions on the back of this sheet to turn on the projector and adjust
the image.
Carrying case
®
The distance between the projector and the screen determines the size of the image.
The diagram below shows approximately how big your image will be, based on
where you set up the projector.
7.9 inches
Table
Convenient for temporary front projection.
Ceiling
Professional installation recommended.
Choose Ceiling from the Advanced menu.
Rear
For permanent installation behind a translucent screen.
Choose Rear Proj. from the Advanced menu.
Rear/Ceiling
Professional installation behind a translucent
screen recommended. Choose Rear Proj. and Ceiling
from the Advanced menu.
30-37'
20-25'
10-12'
8-10'
6-7'
4-5'
3-4'
80"
60"
40"
30"
Turn over
Screen size
(diagonal)
300"
200"
100"

Advertisement

loading

Summary of Contents for Epson PowerLite 30C

  • Page 1: Quick Setup

    If you install the projector in a rear or overhead position, you’ll need to choose the correct projection option, identified below, from the Advanced menu. Follow the instructions on the back of this sheet to turn on the projector and adjust the image.
  • Page 2: Adjust The Image

    General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright © 2002 by Epson America, Inc. Printed in USA. 8/02...