Changing Language Settings; Adjusting Picture Quality - Epson MovieMate 50 User Manual

After you set the sleep timer, you can see the time remaining by pressing
Note: Sleep timer settings are not saved after you turn MovieMate off.

Changing Language Settings

You can use the Language Setup Page to change the default language for DVDs that allow
you to make this selection.
1. Press the button on the remote control. You see the Language Setup Page:
2. Press to highlight the setting you want, then press
available.
OSD Language
available, depending on the DVD or DivX file you are playing.
3. Press to select the language you want, then press
codes, see page 61.
4. To exit the menu, press

Adjusting Picture Quality

You can use the Image page on the Visual Setup menu to adjust the
brightness, contrast, color saturation, tint, sharpness, and other settings
that affect image quality.
1. Press on the remote control. You see the Visual Setup menu.
2. Press to select
3. Press until you see the option you want to set.
is the language used for MovieMate's menus. Other settings may not be
.
.
Image
.
to display the list of languages
to save it. For a list of language
Doing More with Epson MovieMate
37