Download Print this page

Craftsman 580.677130 Owner's Manual page 4

1250 psi 1.5 gpm double insulated electric high pressure washer

Advertisement

CARTON CONTENTS
The following parts are shipped loose with your pressure
washer:
Main Unit -- pressure washer and electrical cord
Parts Bag (which includes items listed below)
Quick-connect (male and female adaptors)
Product Introduction Video
Nozzle Cleaner Kit
Box marked PARTS INSIDE (which includes items
listed below)
Spray Gun
Wand Extension with Hi-Lo Adjustable Nozzle
High Pressure Hose
Become familiar with each piece before assembling the
pressure washer. Check all contents against the illustra-
tion on Page 5. If any parts are missing or damaged, call
the Pressure Washer Helpline at 1-800-222-3136.
TO REMOVE
PRESSURE
WASHER
FROM
CARTON
Remove parts bag.
Remove box labeld PARTS INSIDE.
Remove main unit with attached electrical cord.
HOW TO SET UP YOUR PRESSURE WASHER
Note: Included with your pressure washer is a video cas-
sette that demonstrates how to set up your pressure wash-
er. If you have a video cassette recorder (VCR), you may
want to view the video before assembling your unit.
Included with this unit is a quick-connect fitting that you
must attach to the water inlet. You can install the male
connector end by hand but you may need to use an
adjustable wrench to tighten it. Check the screen on the
female adaptor. Be sure it is clean and check for holes. If
you see any holes in the screen, do net use that adaptor.
MALE
• .FEM_.LE AE
Unwind the high pressure hose and attach it to spray
gun.
Attacn the high pressure hose to the high pressure
outlet and tighten by hand.
HIGH PRESSURE HOSE
'_Z__(
_r--_.
AttaCh adjustable nozzle extension to spray gun by
inserting threaded end of extension into end of spray
gun and tightening the extension securely by hand.
The extension will click when it is in place properly.
CHECKLIST
Check for proper hose connections (high pressure
and water supply) and for tight connections and that
there are no kinks, cuts, or damage to the high pres-
sure hose.
Provide properwater supply (not to exceed 104°F).
Be sure to read =Safety Rules" and "Operation" sec-
tions before using the pressure washer.
4

Advertisement

loading