Advertisement
PROBLEM
Pressure Washer will n otstart,
CAUSE
1. No electrical poweris available.
2. Motor overheats.
Pressure Washer does not
come up to pressure.
High pressure spray is irregular.
No intake of cleaning agent.
3. Trigger not open.
4.
Electrical defect.
1. Spray gun is in low pressure mode.
2.
Pump is sucking air,
3. Water filter clogged,
4.
Pump not bled to remove air.
5.
Pump is defective.
1. Nozzle or watersupply is restricted.
2. Water supply inadequate.
1. Wrong nozzle setting.
2. Nozzle clogged.
3. Suction filter clogged.
CORREC_ON
1. Check cable, plug, power socket
and fuse/circuit breaker.
2.
Length of exle_ion
cord is well
beyond 50 feet.
3. Open trigger.
4.
Contact Sears Service Department.
1.
2.
3,
4.
Adjust nozzle to high pressure
mode.
Water hose must be 1/2" diameter
Make sure water supply is ON.
Make sure water supply is clean.
Check all connections for leaks or
blockage.
Clean filter.
Switch OFF washer, press trigger,
switch ON washer while pressing
trigger. Repeat if necessary.
5. Contact Sears Service Department,
1. Position nozzle completely in low
pressure or high pressure position.
Unplug unit and clean nozzle.
2. Turn ON water to full position.
Operate washer in suction
operation with open container.
1. Adiust nozzle to low pressure mode.
2. Clean nozzle.
3. Clean filter in suction nozzle.
Advertisement
