Windows TCP/IP Network Installation: C5150n & C5200ne
Software
Set Up the Network
Print the Menu Map
This will provide information on the printer's IP Address
which is needed to set the printer up on the network.
□
With the printer turned on, press
□
Press
.
ENTER
□
Press
ENTER
.
The MenuMap prints.
□
Look for the IP Address under TCP/IP Configuration.
Run The Admin Mgr / Quick Setup
Utility
Use this utility to allow various computers on the network
access to the printer.
□
Insert the Drivers CD supplied with your printer in the
CD-ROM drive. The CD will autorun. (If it doesn't,
click Start → Run → Browse. Browse to your
CD-ROM drive, double-click Install.exe, click OK.)
□
The License Agreement appears, click Next.
□
Select your language.
□
The Menu Installer Software Installation dialog box
appears. Click the Productivity Software button.
□
Click the Admin Mgr / Quick Setup button.
□
The OkiLAN 8100e Softnic Setup Utility dialog box
appears. Select your language.
□
Select from the following buttons:
Please read before using: Readme file containing
•
information and instructions for this utility.
OkiLAN 8100e Softnic Standard Setup: if you
•
are experienced in network setup and want access
to all the setting options, click this button and
follow the on-screen instructions for completing
the installation.
OkiLAN 8100e Softnic Quick Setup: This setup
•
is for less experienced users and does not provide
as many setting options as the Standard Setup. To
use Quick Setup, click this button and follow the
steps below.
.
+
3
□
The Welcome dialog box appears. Click Next.
□
If the Ethernet Address information does not
automatically appear, click Search.
□
Click the Ethernet information displayed, then click
Next.
□
Select Yes for TCP/IP protocol and click Next.
□
Select Obtain an IP Address automatically, then click
Next.
□
Select No for NetBEUI protocol, then click Next.
□
Click Execute.
□
Click Finish.
□
Click the Exit button, then click Yes to confirm that you
are exiting the setup utility.
□
Click the Back button.
Install the Driver
□
With the Driver CD in your CD-ROM driver and the
Menu Installer Software Installation dialog box
displayed, click the Printer Driver Installer button.
□
The Local or network printer dialog box appears.
Select Network printer, then click Next.
□
The Connection type dialog box appears. Select
Directly to the network using TCP/IP and click Next.
□
The TCP/IP Connection dialog box appears.
□
Follow the on-screen instructions to complete the
installation.
(continued on next page)