Macintosh Installation
Network Connection
Requires Mac OS 10.1 or above, running on a Macintosh® computer with EtherTalk interface.
Notes:
The Ethernet cable is not supplied with the printer. Use an Ethernet cable with RJ45 connectors at either end.
□
Turn off the printer.
□
Connect your Ethernet cable to the network port on the hub or switch.
□
Remove the plastic cap from the Ethernet port (
□
Connect the other end of the cable to the port (
□
Turn on the printer and wait for the print server status light (
□
Press the Test button (
sheets handy: they contain information you need to set up the printer on your network.
3
) on the print server. The Network Information configuration sheets print. Keep these
) on the printer.
1
).
1
) to stop blinking.
2
13