Table of Contents
Advertisement
2
Use the four-way controller (45) to select the EV value.
To brighten, select a positive (+) value. To darken, select a negative (–) value.
You can choose the EV setting in the range of –2.0 EV to +2.0 EV in 1/3 EV
steps.
• When a histogram is displayed in Still Picture Capture Mode or playback
mode, you can check whether the exposure is correct (p.31).
• EV Compensation cannot be used in some shooting modes. Refer to
"Functions Available for Each Shooting Mode" (p.220) for details.
Saving the EV Compensation setting 1p.120
3
Correcting the Brightness (D-Range Setting)
Expands the dynamic range and prevents bright and dark areas from occurring.
[Highlight Correction] adjusts the bright areas when the image is too bright and
[Shadow Correction] adjusts the dark areas when the image is too dark.
1
Use the four-way controller (23) to select [D-Range Setting]
on the [A Rec. Mode] menu.
2
Press the four-way controller (5).
The [D-Range Setting] screen appears.
3
Use the four-way controller (23)
to select [Highlight Correction] or
[Shadow Correction].
4
Use the four-way controller (45)
to select O (On) or P (Off).
The D-Range Setting icon appears on the
display.
P
Q
O
102
When [Highlight Correction] is set
to O
When [Shadow Correction] is set to
O
When [Highlight Correction] and
[Shadow Correction] are set to O
D-Range Setting
Highlight Correction
Shadow Correction
MENU
P
3 8 3 8 3 8
Advertisement
Table of Contents
