Craftsman 82139 Owner's Manual page 8

Diode Test
Continuity Check
Temperature sensor
Input Impedance
Display
Overrange indication
Polarity
Measurement Rate
Auto Power Off
Low Battery Indication
Batteries
Fuses
Operating Temperature
Storage Temperature
Relative Humidity
Operating Altitude
Weight
Size
Safety
Test current of 0.3mA maximum, open circuit
voltage 1.5V DC typical
Audible signal will sound if the resistance is
less than approximately 30£-._, test current
<0.7mA
Requires type K thermocouple
7.5M£-2(VDC and VAC)
4000 count LCD
"OL" is displayed
Automatic (no indication for positive polarity);
Minus (-) sign for negative polarity.
2 times per second, nominal
Meter automatically shuts down after 15
minutes of inactivity
"BAT" is displayed if battery voltage drops
below operating voltage
Requires two AAA batteries (sold separately)
mA, !_A ranges, 0.5A/250V fast blow
10A range, 10A/250V fast blow
32°F to 122°F (0°C to 50°C)
-4°F to 140°F (-20°C to 60°C)
<70% operating, <80% storage
2000 meters (7000ft.) maximum.
9.17 oz. (260g).
4.78" x 2.38" x 1.57" (121.5mm x 60.6mm x
40mm)
For indoor use and in accordance with
Overvoltage Category II, Pollution Degree 2.
Category II includes local level, appliance,
portable equipment, etc., with transient
overvoltages less than Overvoltage Category
III.