Unpacking Instructions - Craftsman 917.249660 Owner's Manual

KNOWYOUR GRASS CATCHER
READTHIS OWNER'S MANUAL AN D SAFETY RULES BEFORE ASSEMBLING OR OPERATINGYOUR GRASS CATCHER.
Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study
the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to
prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses or eye shields
before starting your tractor and while mowing. We recommend a wide vision safety
mask for over the spectacles or standard safety glasses.
UNPACKING INSTRUCTIONS
CARTON CONTENTS:
Remove all parts and packing materials from carton.
Fold flaps to insideofcarton and turncarton upsidedown
on floor of work area. To protect grass catcher cover
duringassembly place cover upsidedownon overturned
carton.
Check carton contents against list. Be sure all parts
are there.
(2) Container Tops
(2) Container Bottoms
(1) Upper Chute
(1) Lower Chute
(1) Support Post
(1) Mounting Bracket
(1) Cover Assembly
(1) Cover Seal
(1) Bag of Parts
(1) Owner's Manual
NOTE: For ease of assembly, aside of your work area, lay out all hardware in the following groups. Each step of the as-
sembly instructions will identify the group needed for that step.
ASSEMBLY HARDWARE SHOWN ACTUAL SIZE
LOCATION
REAR
MOUNTING
BRACKET
AND
SUPPORT
TUBE
TO
DRAW BAR
SUPPORT
POST
TO
COVER
ASSEMBLY
GROUP"A" _-- _ __
(4) Shoulder Bolt 5116 - 1
m
_IIIIINNIIIIIIIIIH
(4) Bolt 5/16 - 18 x 3/4 (4) Locknut 5/16-18
(2) Washer 11/32 x 1-1/2 x 10 Ga.
(2) Wing Nut
.©
12) LockWasher 5/16
(1) Support Plate
NOT SHOWN FULL SIZE
GROUP
"B"I
(3) Carriage Bolt 5/16 - 18 x 3/4
©
(3) Locknut 5/16-18
5