Summary of Contents for Craftsman Smart Lawn Connect Kit
Page 1
Congratulations on purchasing a Craftsman Smart Lawn Connect Kit. The Craftsman Smart Lawn Connect Plug will easily plug in to the back side of your Craftsman Rider’s Ignition Switch located on the dashboard. These instructions apply to Craftsman Pro Series Zero Turn riding mowers (model #247.XXXXX) Please read through entire instruction sequence before beginning installation.
Page 2
Smart Lawn Connect Kit Installation Instructions Pull Control Panel toward rear of tractor and lift rearward edge (see illustration below). Control Panel...
Page 3
Craftsman Smart Lawn Connect Plug Wire Harness Connector Note prong configuration and install the Craftsman Smart Lawn Connect Plug onto the Ignition Switch. Then plug the Wire Harness Connector into the Craftsman Smart Lawn Connect Plug (refer to illustration above).
Page 4
NOTE: The base of the Ignition Switch prongs will be visible in the gap between the Ignition Switch and the Craftsman Smart Lawn Connect Plug. This is intentional, and allows for proper plug functionality. Prongs will be visible here Before reassembling the Console, tug on the ends of the plug assembly.
Page 5
Smart Lawn Connect Kit Installation Instructions Once the Plug assembly is secure, push Control Panel down and forward into Fender (see illustration below). Control Panel Note - hook feature fits into slot in fender.
Page 6
For additional information please refer to: craftsman.com/connectkit If you have further questions, call the Craftsman help line at 1-888-331-4569 Once assembly is complete please download the FREE Craftsman Smart Lawn App to begin using all of the new connectivity features of your Craftsman rider! †...