Craftsman 247.77466 Operator's Manual page 13

Set.010" to.060" c learance b etween thenylon
"spider" a ndtheengine coupling halfbysliding a
matchbook coverbetween t henylon"spider" a nd
theengine coupling h alfandmoving pump coupling
halfasneeded. Secure pumpcoupling halfwithset
screw. S eeFigure 11.
NOTE: Make certain proper clearance is obtained
before tightening setscrew.
Gear Pump
Tires
See sidewall of tire for recommended pressu re.
Maximum tire pressure under any circumstances is 30
p.s.i. Equal tire pressure should be maintained on all
tires.
,_ WARNING: Excessive pressure (over 30
p.s.i.) when seating beads may cause tire/
rim assembly to burst with force sufficient
to cause serious injury. Refer to sidewall
of tire for recommended pressure.
Figure 11
13