Laser Guide - Craftsman 315.262520 Operator's Manual

LASER GUIDE WARNINGS:
The laser guide radiation used in this tool is Class
Ilia with maximum <5 mW and 650nm wavelengths.
These lasers do not normally present an optical hazard
although staring at the beam may cause flash blindness.
• Avoid direct eye exposure when using the laser guide.
• The laser shall be used and maintained in accordance
with the manufacturer's instructions.
• Never aim the beam at a person or object other than
the workpiece.
• Always ensure the laser beam is aimed at a sturdy
workpiece without reflective surfaces. Shiny reflective
sheet metal or similar shiny materials are not suitable
for laser use.
• All repairs should be made by an authorized service
representative or the laser manufacturer.
• Save these instructions. Refer to them frequently and
use them to instruct others who may use this power
tool. If you loan someone this power tool, loan them
these instructions also.
_k WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.