Operation; Product View And Parts Identification - Sears Craftsman 536.886121 Owner's Manual

......... i ii iillllIll I I,,11 I, ul Ill I ll,,I.
O T
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW
THROWER= Compare the illustrationswith your snow thrower to familiarize yourself with the location of various
controlsand adjustment& Save this manual for future reference.
AUGER TRACTION
DRIVE DRIVE LEVER
LEVER
KEY
BUTTON
STARTER
SPEED
SHIFTER
LEVER
CRANK
ASSEMBLY
CHUTE
DEFLECTOR
DISCHARGE
CHUTE
\
STARTER
HANDLE
THROTTLE CONTROL
HEIGHT ADJUST SKIDS
S_RAPER BAR
FIG. 8
SEARS SNOW THROWERS conformto the safety standards of the American National Standards Institute, B71 3-1984
........................ . ..... ,,,, , ,,,,,,,,, , ,,,,
AUGER DRIVE LEVER - Starts and stops the auger and
impeller (snow gathering and throwing).,
TRACTION DRIVE LEVER - Propels the snow thrower
forward and in reverse,
SPEED SHIFTER LEVER - Selects the speed of the
snow thrower (6 speeds forward and 2 speeds reverse).
CRANK ASSEMBLY - Changes the direction of snow
throwing through the discharge chute.
CHUTE DEFLECTOR - Changes the distance the snow
is thrown,,
DISCHARGE CHUTE - Changes the direction the snow
is _itrown.
10
HEIGHT ADJUST SKIDS - Adjusts the ground clearance
of the auger housing,
IGNITION KEY - Must be inserted to start the engine
ELECTRIC STARTER BUTTON - Used to start the
engine using the 120 V,. electric starter
RECOIL STARTER HANDLE - Stads the engine manu-
ally,.
CHOKE CONTROL - Used to start a cold engine
PRIMER BUTTON - Injects fuel directty into the carbure-
tor manifofd for fast starts in cold weather
THROTTLE CONTROL - Controls the engine speed