Installing Your Workforce 310 Series On A Network; Connect An Ethernet Network Cable - Epson WorkForce C362B Quick Manual

Installing Your WorkForce 310
Series on a Network
Follow the steps in this chapter to connect the WorkForce 310 Series to your
network. After you have connected the printer to your network, you need to
install the WorkForce 310 Series software on each computer you would like to
print from.

Connect an Ethernet Network Cable

1. Connect an Ethernet network cable to the
WorkForce 310 Series.
2. Connect the other end to any available LAN port on your router, wireless
access point, or hub.
3. Continue with the steps in the next section to install software.

Installing Your WorkForce 310 Series on a Network

port on your
LAN (10/100)
5