Connector Settings - Asus RAMPAGE III EXTREME User Manual

Information
Click the Information button (
display information about the audio
driver version, DirectX version, audio
controller, audio codec, and language
setting.

Connector settings

Click the Connector Settings button
( ) to show further settings for the
analog/digital output/input ports.
Configuration options
Click any of the tabs in this area to configure your audio settings.
The Configuration options shown in this section are for reference purposes
only and may not exactly match what you see on your screen. In the Windows
Vista™ environment, Realtek HD Audio Manager automatically detects devices
connected to the analog/digital ports and shows corresponding configuration
options tabs.
Digital Output
To set the digital output options
Click the Digital Output tab.
1.
Click Set Default Device to set the
2.
digital output port as the default audio
output device.
Click the Sound Effects sub-tab for
3.
options on changing the acoustic
environment and karaoke settings, or
click the Default Format sub-tab for
options on changing the default audio output format.
Click OK to effect the Digital Output settings and exit.
4.
4-10
Device advanced settings
) to
Click Device advanced settings to
show further settings for the playback
and recording device.
Chapter 4: Software support