2.7.4
TweakIt
TweakIt, along with the LCD Poster, allows you full control over system voltages
and frequency to fulfill your overclocking desire during game play. You can also
monitor hardware information or configure BIOS boot selection and BIOS backup.
TweakIt consists of the TOGGLE button, the CONFIRM button, and the SELECT
joystick:
TOGGLE: Press to go back to the previous option.
•
CONFIRM: Press to enter an option or confirm your settings.
•
SELECT: Joystick left (previous; decrease) / right (next; increase) to select an
•
option or adjust value.
Refer to the following illustration for their location.
Using TweakIt
1.
Connect the LCD Poster to the
LCD_CON connector on the
motherboard.
2.
Turn on the system. After the
power-on self tests (POST), the
LCD Poster shows system time.
Press the CONFIRM button to
3.
enter TweakIt options and configure
your own settings with TOGGLE,
CONFIRM, and SELECT.
ROG Rampage II Extreme
2-43