Asus Rampage II Extreme - Republic of Gamers Motherboard User Manual page 195

Debug code table
Code Description
Clear EPA or customization logo.
1. Call chipset power management hook.
PASSWORD
2. Recover the text fond used by EPA logo (not for full screen logo)
3. If password is set, ask for password.
Initialize PnP boot devices
1. USB final Initialization
2. NET PC: Build SYSID structure
3. Switch screen back to text mode
USB FINAL
4. Set up ACPI table at top of memory.
5. Invoke ISA adapter ROMs
6. Assign IRQs to PCI devices
7. Initialize APM
8. Clear noise of IRQs.
INIT ROM
Initialize device option ROMs.
1. Program daylight saving
NUM LOCK
2. Update keyboard LED & typematic rate
1. Build MP table
2. Build & update ESCD
UPDT DMI
3. Set CMOS century to 20h or 19h
4. Load CMOS time into DOS timer tick
5. Build MSIRQ routing table.
INT 19H
Boot attempt (INT 19h)
ROG Rampage II Extreme A-3