Replacing The Maintenance Tank - Epson STYLUS 7890 User Manual

Maintaining and Transporting the Printer

Replacing the Maintenance Tank

The maintenance tank stores ink that gets flushed from the system during
the initial ink charge and manual and automatic print head cleaning. When
the tank is almost full, the message
appears on the LCD screen. When the tank is completely full, the printer
stops working and
MAINTENANCE TANK FULL
screen.
You can check how much space remains in the maintenance tank by viewing
its icon on the control panel, shown below. You can also check its status
using the menus (see page 146), using your printer software (see page 147),
or by printing a nozzle check sheet (see page 150).
The icon(s) show the approximate amount of space remaining in the tank(s).
The Epson Stylus Pro 7890 has one maintenance tank (on the right side),
and the Pro 9890 has two (one on either side). Replacement tanks are
available from Epson (part number C12C890191). See page 12 for details.
The printer will not print if one of the maintenance tanks is full. On the
Epson Stylus Pro 9890, the right tank is used more than the left. To
maximize tank life, you can switch the tanks when the right tank reaches
approximately 40% to 60% of capacity.
Follow these steps to replace the tank:
1. If you have the Epson Stylus Pro 9890, check the LCD screen to
determine which tank needs to be replaced (left or right).
2. Turn off the printer.
163
MAINTENANCE TANK NEARLY FULL
appears on the LCD
Maintenance tank icons
(only one tank icon
appears on the
Pro 7890 LCD screen)
| 163