Downloading And Updating The Firmware - Epson STYLUS 7890 User Manual

Caution: Don't turn off
the printer while the
firmware is updating.
Note: After you install
the software, you need to
load paper and print a
test image. If the print
quality is satisfactory,
your setup is done. If not,
you may need to align the
print head, as described
on page 152.
Note: For more
information on using the
LFP Remote Panel, click
Help to see the on-screen
guide.

Downloading and Updating the Firmware

1. Click the
EPSON LFP Remote Panel 2
the LFP Remote Panel.
2. Select your printer, then click the
When you see the prompt, click
Panel utility automatically locate and download the latest firmware from
the Epson website.
If you need to download the firmware manually, visit Epson's U.S.
support website (www.epson.com/support) or Canadian support
website (www.epson.ca/support), select your product, then click
Drivers & Downloads
Choose the firmware update version for Macintosh or Windows and
follow the instructions on the screen.
3. Make sure your printer is turned on, its LCD screen displays
and it is connected to your computer or network, then choose your
printer.
4. Click and find the firmware file that you just downloaded and
Browse
extracted. Select the file and click
5. If the firmware version of the file is newer, click
firmware updating process. (If it is the same, you don't need to update.)
6. When the update is complete, close the Firmware Updater window and
Epson LFP Remote window.
If you connected your printer to a network, follow the instructions in the
next section to configure the printer for your network.
Setting Up the Printer
Firmware Updater
to have the EPSON LFP Remote
OK
.
Choose
53
icon on your desktop. You see
button.
READY
or .
Open
to start the
Update
| 53
,