Usb/Media Card Reader Board - HP 6710b - Compaq Business Notebook Maintenance And Service Manual

3. Remove the speaker assembly (3).
Reverse this procedure to install the speaker assembly.

USB/Media Card Reader board

NOTE: This section applies only to HP Compaq 6715b and 6710b computer models.
Description
USB/Media Card Reader board (includes USB/Media Card Reader board cable)
Before removing the USB/Media Card Reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/WLAN module compartment cover (see
c. Optical drive (see
d. Keyboard (see
e. Switch cover (see
f. Display assembly (see
g. Top cover (see
86 Chapter 4 Removal and replacement procedures
Battery on page 48).
Hard drive on page 52)
Optical drive on page
Keyboard on page 64)
Switch cover on page
Display assembly on page
Top cover on page 81)
Expansion memory module on page
62)
70)
76)
Spare part number
443883-001
56)