HP 6710b - Compaq Business Notebook Maintenance And Service Manual page 85

2. Remove the wireless antenna cables (2) from the routing channels and clips built into the top cover.
3. Remove the two Torx T8M2.5×9.0 screws (1) that secure the display assembly to the computer.
NOTE: The screw removed from the left hinge secures a ground loop (2) for the display panel
cable.
4. Position the computer with the rear panel toward you.
5. Remove the four Torx T8M2.5×9.0 screws (1) that secure the display assembly to the computer.
Component replacement procedures 77