Table of Contents
Advertisement
illlllll
i,iiiiWl,i
iiiill illll
i
IIIIIIIH
,I
I
II
IIIll
111111
CE AND ADJUSTMENTS
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug.
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
•
Depress clutch/brake pedal fully and set parking brake.
Place gearshift lever in neutral (N) position.
•
Place attachment clutch in "DISENGAGED"
position.
•
Turn ignition key "OFF" and remove key.
•
Make sure the blades and all moving parts have completely stopped.
TO REMOVE
MOWER
(See Fig. 16)
Mower willbe easier to remove from the right side of tractor.
•
Place attachment clutch in "DISENGAGED" position,
•
Move attachment lift lever forward to lower mower to its
lowest position,
•
Roll belt off engine pulley.
•
Disconnect clutch rod from clutch lever by removing
retainer spring.
•
Disconnect anti-sway bar from chassis bracket by
removing retainer spdng,
•
Disconnect suspension arms from rear deck brackets
by removing retainer springs.
°
Disconnect front links from deck by removing retainer
: springs.
•
Raise fft teverto raise suspension arms. Slide mower
out from under tractor.
IMPORTANT:
IF AN ATTACHMENT OTHER THAN THE
MOWER IS TO BE MOUNTED TO THE TRACTOR, THE
R.H. AND L.H, SUSPENSION ARMS MUST BE REMOVED
FROM TRACTOR,
TO INSTALL MOWER (See Fig. 16)
'
Raise attachment lift lever to its highest position,
•
Slide mower under tractor with discharge guard to right
side of tractor,
°
Lower lift lever to its lowest position.
•
Install mower in reverse order of removal instructions.
CLUT(
CLUTCH LEVER
RETAINER
SUSPENSION
ENGINE
ARMS
PULLEY
RETAINER
SPRING
ANTI-SWAY BAR
RETAINER
SPRINGS
"'--,. (BOTH SIDES)
RETAINER
SPRINGS
(BOTH SIDES)
FIG. 16
19
Advertisement
Table of Contents
