Advertisement

CRBF/'S
L
917.256511
/:/M°
OWNER'S MANUAL
o Assembly
, Operation
®Customer Responsibilities
, Service and Adjustments
, Repair Parts
CAUTION:
Read and follow all safety_rules
and instructions
before operating
this equipment.
FOR CONSUMER ASSISTANCE HOT LINE, CALL THIS TOLL FREE NUMBER: 1-B00-659-5917

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 917.256511

  • Page 1 CRBF/'S /:/M° 917.256511 OWNER'S MANUAL o Assembly , Operation ®Customer Responsibilities , Service and Adjustments , Repair Parts CAUTION: Read and follow all safety_rules and instructions before operating this equipment. FOR CONSUMER ASSISTANCE HOT LINE, CALL THIS TOLL FREE NUMBER: 1-B00-659-5917...
  • Page 2 SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE iS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBjECTS_ FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH._ GENERAL OPERATION III, CHILDREN •...
  • Page 3: Product Specifications

    DAYS FROM THE DATE OF PURCHASE° PLEASE CONTACT YOUR NEAREST SERVICE CENTER.. AFTER 30 DAYS FROM THE DATE OF PURCHASE, WARRANTY SERVICE IS AVAILABLE BY TAKING YOUR CRAFTSMAN RIDING EQUIP- MENT TO YOUR NEAREST SEARS SERVICE CENTER. (IN-HOME WARRANTY SERVICE WILL STILL BE AVAILABLE AFTER 30 DAYS FROM THE DATE OF PURCHASE BUT A STANDARD TRIP CHARGE WILL APPLY.)
  • Page 4 TABLE OF CONTENTS SAFETY RULES ............MAINTENANCE SCHEDULE ........PRODUCT SPECIFICATIONS ........3 SERVICE AND ADJUSTMENTS ......20-25 CUSTOMER RESPONSIBILITIES ..... 3, 15-19 STORAGE ..............WARRANTY ..............TROUBLESHOOTING ........... 27-28 TRACTOR ACCESSORIES .......... 5 REPAIR PARTS - TRACTOR ........ 30-47 ASSEMBLY ....
  • Page 5: Accessories

    ACCESSORHE$ AND ATTACHMENTS These accessories and attachments were available throughmost Sears retail outlets and service centers when the tractor was purchased. Most Sears stores can order these items for you when you provide the model number of your tractor_ MAINTENANCE ENGINE SPARK PLUG GAS CAN...
  • Page 6 CONTENTS OF HARDWARE PACK Parts Bag contents shown full size Parts packed separately in carton Seat Metal (2) Sheet Screws #t0-16 x I/2 Steering Boot II: ! Steering Wheel Video Cassette (!) Shoulder Bolt 5/16-18 (1) Hex Bolt 1/2-13 x 1 Manual Parts bag contents not shown full size (1) Lock Washer 1/2...
  • Page 7 ASSEM 'U','II Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.
  • Page 8 ASSEMBLY CONNECT BATTERY (See Figs. 2 and 3) CAUTION: Do not short battery termi- SEAT nals. Before connecting battery, re- bands, rings, etc. move metal bracelets, wristwatch Positive terminal must be connected first to prevent sparking from acciden- tal grounding. •...
  • Page 9 ASSE CHECKTIRE PRESSURE ,/CHECKL IS T The tires on your tractor were overinflated at the factory for BEFORE YOU OPERATE AND ENJOY YOUR NEW shipping purposes. Correct tire pressure is important for TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE best cutting performance.
  • Page 10 iii/11111 iiiiiiiiiiiiiiiiiii ira, ILIIII iiiii iiii These symbols may appear' on your tractor or'in literature supplied with the product° Learn and understand their meaning. FORWARD FAST SLOW BATTERY CAUTION OR REVERSE WARNING ENGINE ON ENGINE OFF OIL PRESSURE CLUTCH LIGHTS ON LIGHTS OFF FUEL CHOKE...
  • Page 11 OPEBATION L,m iml,,m,,, _mmmml KNOWYOURTRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrationswith yourtractorto familiarize yoursetfwiththe locations of variouscontrolsand adjustments, Save this manual for future reference. ATTACHMENT IGNITION AMMETER CLUTCH LEVER SWITCH LIFT LEVER PLUNGER ATTACHMENT LIFT LEVER...
  • Page 12 OPERATION IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII lllklllllllJllkllklkJJ The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over the spectacles or standard safety glasses.
  • Page 13: Carburetor

    OPERATION TO OPERATE MOWER (See Fig. 7) To restart movement, slowly release parking brake and clutch/brake pedal. Your tractor is equipped with an operator presence sens- ° Make all turns slowIy ing switch. Any attempt by the operator to leave the seat withthe engine runningand the attachment clutch engaged TO TRANSPORT will shut off the engine_...
  • Page 14 OPERATION MOWING TIPS TO START ENGINE (See Fig. 6) ° Tire chains cannot be used when the mower housing When starting the engine for the first time or if the engine is attached to tractor. has run out of fuel, it wilt take extra cranking time to move fuel from the tank to the engine.
  • Page 15 AS YOU COMPLETE REGULARSERV!,rCrE ....=_,__ERVlCE DATES CheckBrake Operation .... _ ........CheckTire Pressure Checkfor Loose Fasteners ......" Sharpen/Replace MowerB'iades " l l,,i .... ,," ..........check BatteryLeveb'Recharge " ......1..CleanBatteryandTerminals CheckTransaxte Cooling _ ..... AdjustB,adeBe,ls) Te ;s oo ..
  • Page 16 CUSTOMER R IBILITIES TRACTOR Always observe safety rules when performing any mainte- BLADE MANDREL nance. ASSEMBLY BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highestgear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and Adjust- TRAILING EDGE merits section of this manual)°...
  • Page 17 CUSTOME RLmTIES BATTERY NOTE: Although multi-viscosity oils (5W30, !0W30 etc.) improve starting in cold weather, these multi-viscosity oils Your tractor has a battery charging system which is suffi- will result in increased oil consumption when used above cient for normal use.. However, periodic charging of the 32°F.
  • Page 18 CUSTOMER RESPONSiBIL ....i i i i illlllllll, i CLEAN AIR SCREEN (See Fig. 14) AIR FILTER (See Fig. 13) Air screen must be kept free of dirt and chaff to prevent Your engine will not run properrIyusing a dirty air filter_ engine damage from overheating, Clean with a wire brush Clean the foam pre-cleaner after every 25 hours of opera- or compressed air to remove dirt and stubborn dried gum...
  • Page 19 CUSTOMER ruES MUFFLER CLAMP Inspectand replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. SPARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first.
  • Page 20 ICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: • Depress clutch/brake peda ! ful!yand set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in "DISENGAGED" position. Turn ignition key "OFF" and remove key. • Make sure the blades and all moving parts have completely stopped= °...
  • Page 21: Side-To-Side 2

    SERVICE AN ADJUSTMENTS TO LEVEL MOWER HOUSING FRONT-TO-BACK ADJUSTMENT (See Figs,, 19 and 20) IMPORTANT; DECK MUST BE LEVEL SIDE-TO-SIDEo Adjust the mower while tractor is parked on level ground or THE FOLLOWING FRONT-TO-BACK ADJUSTMENT driveway. Make sure tires are properly inflated (See NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS "PRODUCT SPECIFICATIONS"...
  • Page 22 SERVICE AND ADJUSTMENTS : ........... ,,,, ,, ,,,,, ,,,,, TO REPLACE MOWER BLADE DRIVE BELT WITH PARKING BRAKE "ENGAGED" (See Fig. 21) The mower blade drive belt may be replaced withouttools. Park the tractor on level surface. Engage parking brake. BELT REMOVAL - •...
  • Page 23 SERVICE AND ADJUSTMENTS TO ADJUST STEERING WHEEL ALIGNMENT TO START ENGINE WITH A WEAK BATTERY (See Fig. 25) If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions inthe Assembly CAUTION: Lead-acid batteries gener-.
  • Page 24 SERVICE AND ADJUSTM ENGINE TO REPLACE HEADLIGHT BULB • Raise hood,, TO ADJUST THROTTLE CONTROL CABLE • Pull bulb holder out of the hole in the backside of the (See Fig. 27) grill. The throttle control has been preset at the factory and •...
  • Page 25 $ERVmCE AND ADJUSTMENTS TO ADJUST CARBURETOR (See Fig. 28) ACCELERATION TEST - The carburetor has been preset at the factory and adjust- ° Move throttle control lever from slow (._) to fast (,_) ment should not be necessary_. However, minor adjust- position.
  • Page 26: Cleaning

    STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or' if the tractor wilt not be used for 30 days or more. FUEL SYSTEM ......,, ,,.., IMPORTANT: IT IS IMPORTANT TO PREVENT GUM CAUTION: Never store the tractor with DEPOSITS FROM FORMING IN ESSENTIAL...
  • Page 27: Levels

    TROUBLESHOOTmNG POnNTS PROBLEM CAUSE CORRECTION Wilt not start Out of fuel,, Ftfl fuel tank, Engine not "CHOKED" properly. 2,, See '3'0 START ENGINE _ in Operation section, Engine flooded,, 3o Wait several minutes before attempting to start. Bed spark piug Replace spark plug, Dirty air filter., 5,, Clean/replace air filter,...
  • Page 28 OOTING POINTS TROU CORRECTION CAUSE PROBLEM Faufty operator-safety presence €ontrol system Check wiring, switches and connections, if not Engine continues to run corrected, contact an authorized service center/ when operator leaves seat department, with attachment clutch engaged Replace blade. Tighten blade bolt, Poor cut - uneven Worn, bent or loose blade, "L...
  • Page 29 TRACTOR - - MODEL NUMBER 917.256511 SCHEMATIC BLACK BATTERY STARTER AMMETER BLACK SOLENOID CLUTCH/ BRAKE (PEDAL UP) WHITE SEAT SWITCH IGNITION SWITCH (NOT OCCUPIED) BLACK BLACK BLACK GROUNDING CONNECTOR BLACK IGNITION }______ SPARK _____ UNIT PLUG AFTER FIRESOLENOID CHARGING SYSTEM OUTPLrr 2B VOLTS AC MtN.
  • Page 30 REPAIR PARTS TRACTOR - - MODEL NUMBER 917.256511 36 38...
  • Page 31 144921 Switch tgn 3 Pos 140400 Nut Ignition 141226 Cover Sw Key BIk 1 25 Text SLT 140403 Key Ign Molded Craftsman 110712X Switch Light BIk Blk Red STD601005 Screw Tap Hex #10-24unc X 1/2 140336 Bracket Switch Interlock 109553X...
  • Page 32 REPAIR PARTS TRACTOR -- MODEL NUMBER 917.256511 CHASSIS AND ENCLOSURES 26 31 14..4 _-.._...
  • Page 33 RIEPAURPARTS TRACTOR - - MODEL NUMBER 917.256511 CHASSIS AND ENCLOSURES PART DESCRIPTION 151169 Chassis Weldment 1lga 1995 140356 Drawbar Stretch 17490612 Screw Thdrol 3t8-16x3/4 Ty-tt STD55t025 Washer 13/32 x 3/4 x 16 Ga, 146077 Bumper Snap-in 145208X016 Saddle Silkscreen 6sp Fit Sdl D4360 126842X Shield Ht Hood Kohl/Dia Engine...
  • Page 34 REPAIR PARTS TRACTOR -- MODEL NUMBER 917.256511 DRIVE , 65...
  • Page 35 REPAIR PARTS TRACTOR -- MODEL NUMBER 917.256511 DRIVE PART PART DESCRIPTION DESCRIPTION Washer 13/32 X 13/16 X 12 Ga 142603 Transaxle 6sp Std Dana, '19131312 Model No. 4360-79 105706X Bearing Nyl 503 X 628 X 1 25 Washer Hardened 146682 Spring Return Brake tI0812X 123666X...
  • Page 36 REPAIR PARTS TRACTOR - - MODEL NUMBER 917.256511 STEERING ASSEMBLY "_._ 25...
  • Page 37 REPAIR PARTS TRACTOR -- MODEL NUMBER 917,256511 STEERING ASSEMBLY PART DESCRIPTION 139768 Wheel Steering Std Black 142033 Axle Asm Front 135227 Spindle Asm Lh 135228 Spindle Asm Rh 6266H Bearing Race Thrust Harden 121748X Washer 25/32 X 1 5/8 X 16ga 19272016 Washer 27/32 X 1 t/4 X 16 Ga 12000029...
  • Page 38 SEAT ASSEMBLY PART PART DESCRIPTION DESCRIPTION Bolt Rdhd Sht Nk 1/4-20xl-3/8 72050411 140122 Seat 3350 Blkiblk Craftsman 13430O Spacer Split 28 X 96 Zinc 140551 Bracket Pnt Pivot Seat (blk) I21250X STD523710 Bolt Fin Hex 3!8-16uncX 1 Spring Cprsn t 27 Blk Pnt...
  • Page 39 Decat Hood Slope Rh Craftsman 136832 150677 Decal Hood Slope Lh Craftsman 140837 Decal Saddle Brake Parking 150680 Decal Grille Craftsman Slp LT Dov 150333 Decal, Cap Cnsmr Help Line Srs, Decal Maint Customer Sears Dora 133179 133644 Decal Mower Qc System...
  • Page 40 REPAIR PARTS TRACTOR - - MODEL NUMBER 917.256511 ENGINE OPTIONAL EQUIPMENT Spark Arrester...
  • Page 41 REPAnR PARTS TRACTOR -- MODEL NUMBER 917.256511 ENGINE PART DESCRIPTION 132759 Control Throt Rh BIk Pd115 10 17720410 Screw Hex Thd Cut 1/4-20x5/8 T 150457 Engine B&S 15/15.5 DIC & GD DC 1 Model No,,28N707, Type Non0171-0I 137352 Muffler Exhaust B&S Lt 272293 Gasket 1 313 id Tin Plated 13280324...
  • Page 42 REPAIR PARTS TRACTOR - - MODEL NUMBER 917.256511 LIFT j,of...
  • Page 43 REPAIR PARTS TRACTOR - - MODEL NUMBER 917.256511 LIFT PART DESCRIPTION 136973 Rod Asmo Lever 122507X Shaft Asmo Lift 105767X Pin Groove 12000002 E Ring #5133-62 19211621 Washer 21/32 x 1 x 21 Ga. 120183X Bearing Nylong 125631X Grip Handle Fluted 122365X Button Plunger Read 122512X...
  • Page 44 REPAIR PARTS TRACTOR -- MODEL NUMBER 917,256511 MOWER...
  • Page 45 RIEPARRPARTS TRACTOR - - MODEL NUMBER 917.256511 MOWER PART PART DESCRIPTION DESCRIPTION 144393 140O88 Mower Housing Guard, Mandrel, LH. Bolt STD533107 STD624003 Retainer 138017 Bracket Assembly,Sway Bar, Front 137729 Screw, Thd,. Rotl 1/4-20 x 5/8 138440 133944 Bracket Assembly, Sway Bar Washer, Hardened STD624008 133940...
  • Page 46 REPAIR PARTS TRACTOR -- MODEL NUMBER 917.256511 DANA TRANSAXLE - MODEL NUMBER 4360-79 11"...
  • Page 47 REPAIR PARTS TRACTOR -- MODEL NUMBER 917.256511 DANA TRANSAXLE - MODEL NUMBER 4360-79 KEY PART KEY PART NO° NO. DESCRIPTION NO. NO. DESCRIPTION Sprocket, 9 Teeth (Reverse) 142671 Housing, Upper 105928X Gear, Bevel, 42 Teeth 2274J Screw, Self-Tapping, Large 110084X * Assembly, Kit, Shim .750 Shaft 1/4-20 x ,734 134394...
  • Page 48 REPAIR PARTS TRACTOR - - MODEL NUMBER 917.256511 BRIGGS & STRATFON ENGINE - MODEL NUMBER 28N707, TYPE NUMBER 0171-01 634A REQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL 238 0 1023 1026...
  • Page 49 REPAIR PARTS TRACTOR - - MODEL NUMBER 917.256511 BRIGGS & STRATTON ENGINE - MODEL NUMBER 28N707, TYPE NUMBER 0171-01 i ii JlIIIIIIIH,,,, ,,,, 1033 VALVE OVERHAUL 0 22 ..611 "13eO _123 _947 _k REQUIRES SPEClALTOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL.
  • Page 50 REPAIR PARTS TRACTOR .. - MODEL NUMBER 917.256511 BRIGGS & STRATTON ENGINE - MODEL NUMBER 28N707, TYPE NUMBER 0171-01 977 CARBURETOR GASKET _224 1044...
  • Page 51 REPAIR PARTS TRACTOR -- MODEL NUMBER 917.256511 BRIGGS & STRATTON ENGINE - MODEL NUMBER 28N707, TYPE NUMBER 0171-01 232j _'/) _{[_::_266 it0_19 LABEL'KIT ....1090...
  • Page 52 REPAIR PARTS TRACTOR -- MODEL NUMBER 917.256511 BRIGGS & STRATTON ENGINE - MODEL NUMBER 28N707, TYPE NUMBER 0171-01 KEY PART KEY PART NO. NO. DESCRIPTION NO, NO. DESCRIPTION 496412 Cylinder Assembly 94098 **Screw, Throttle 399265 Bearing, Cylinder 495800 Screw, Idle Speed 391086 *Seal, Oil 231789...
  • Page 53 REPAnR PARTS TRACTOR - - MODEL NUMBER 917.256511 BRIGGS & STRATTON ENGINE - MODEL NUMBER 28N707, TYPE NUMBER 0171-01 KEY PART KEY PART NO° NO, DESCRIPTION NO. NO, DESCRIPTION 284A 94073 Screw, Hex Head 729A 225170 Retainer, Wire 294 810068 Screw, Set 741 262932 Gear, Timing...
  • Page 54 SERVICE N...
  • Page 55 SUGGESTED GUIDE FOR SiGHTiNG SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SIGHTING GUIDE SIGHT AND HOLD THIS LEVEL WITH SKY LINE OR TREE. 15 ° MAX. i Jl i ill i illl illii • IIIH| IIllllllll I Illllll '...
  • Page 56: Replacement

    I:RnFT/MnN o OWNER'S 15,5 HP IC MANUAL ELECTRIC START 42" MOWER 6 SPEED TRANSAXLE LAWN TRACTOR MODEL NO. Each tractor has its own model number. Each engine has its own model number. 917.256511 The model number for your' tractor will be found on the model plate located under the seat.

Table of Contents