Advertisement
3,
Slide the second lower support rod through outer edge
of the cart cover. Slide an end of the rope onto the rod
end as it approaches each gap in edge. The bend in
the rod must face in the direction shown in figure 16.
CART COVER
ROPE
SUPPORTROD
FIGURE 16
5,
Attach the front (straight) support rod to the outside
of the top angle support and a lower (bent) support
rod to the inside using two 1/4" x 3/4" hex bolts and
1/4" lock nuts. DO NOT TIGHTEN YET. See figure 18.
NOTE: Cart bag not shown for clarity,
FRONT ROD
(STRAIGHT)
1/4" LOCK NUT
1/4" x 3/4" HEX BOLT
LOWER ROD
(BENT)
FIGURE 18
4. Secure front support tube to top angle support using
two 1/4" x 1-1/4" hex bolts and 1/4" lock nuts. DO NOT
TIGHTEN YET. See figure 17.
NOTE: Cart bag not shown for clarity,
%_
1/4" LOCK NUT
1/4" x 1-1/4" HEX BOLT
%
FIGURE 17
13
Advertisement
