Description; Know Your Circular Saw - Craftsman 320.18780 Operator's Manual

KNOW; _OUR GIRC ,IJLAR SAW (Fig. 2)
Fig. 2
• Trigger Switch
Rear Handle
LJpper
Blade Guard
Lower Blade
Guard LeVer
L-Blade "
Lower
Blade Guard
_- o. o
Spin_die-Clamping
':v _- Screw ' " "
Front
_s_i_t:;Han_die
Motor- Housing
_o - Motor Housing-
Front Assist Handle
Spiffdle-Lock
Butt0n_
x-
J
Bevel Scale
Bev'eI-Acli'ustrfient
._-:-L,.o.c_ki_g ,L,ever _.
:,_- _ ,. Base...,
MOL_'nti:rig S lots :
for Edge-Guide : . _
Depth-of-Cu[ SCale
Lower Blade--
Guard Lever
_=
-Look-off- Button
adj.usting leyer ,_:
N-O'i'E- Bef()re attempting tO use your sa.w, familiarize yourself With all_f its .....
operating features and safety requirer_nts.. ;!_!::: _ ;_-
Your circular saw has a precision-built electric motor; it should only be
connected to a 120-volt, 60-Hz AC only power supply (normal household
current). Do not operate on direct current (DC). This large voltage drop will cause
a loss of power and the motor will overheat. If the saw does not operate when
plugged into correct 120-volt, 60-Hz AC ONLY outlet, check the power supply.
The saw has an 8-ft., 2-wire power cord (no adapter needed).
18"_.'_B_ Manual_Revised_09-0513 ,-, Page 13