Symbols - Craftsman 320.18780 Operator's Manual

The purpose of safety symbols is to attract your attention to possible dangers. _
The safety symbols, and the explanations with them, deserve your careful
attention and understanding. The symbol warnings DO NOT, by themselves, :
eliminate any danger. The instructions and warning they give are no substitutes
for proper accident prevention measures.
_IL WARNING: Be sure to read and understand all safety instructions in this '_
manual, including all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION," before using this tool. Failure to following_ll instructions listed
below may result in electric shock, fire and/or serious personal injury_
SYMBOL MEANING
_i_ SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTIOI_
May be used in conjunction with other symbols or pictographs.
_IL DANGER: Failure to obey this safety warning will result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the
risk of fire, electric shock and i3ersonal injury.
WARNING: Failure to obey this safety warning can result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the
risk of fire, electric shock and personal injury.
CAUTION: Failure to obey this safety warning may result.in personal injury
to yourself or others or property damage. Always follow the safety precautions to
reduce the risk of fire, electric shock and personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform user of important information and/or instructions that could lead to
equipment or other property damage if not followed. Each message is preceded
by the word "NOTE" as in the example below:
NOTE: Equipment an_i/or property damage may result if these instructions
are not followed.
WEAR YOUR
_IL WARNING: The operation of any power tools can
result in foreign objects being thrown into your eyeS,
which can result in severe eye damage. Before
beginning power tool operation, always wear safety
les or safety glasses with side shield .and a full-
face shield when needed. We recon_mend a Wide _
Vision Safety Mask for use over eyeglasses or. standard
safety glasses withside shield, available at Sears
Stores or other Craftsman outlets. Always use eye
protection that is marked to comply with_ANS! -Z87.1
18780 Manual Revised_09-0513 Page 3