Table of Contents
Advertisement
Befo]e
Each
Start-Up:
I.
Place On/Auto/Off lever to
"OFF" end close air regulator.
2.
Pull regulator
knob out, turn
counterclockwise
until it stops.
Push knob in to lock in place.
3
Attach hose and accessories.
NOTE: The hose or accessory
will reuu_re e quick connect plug
if the air outlet is equipped with a
quick connect socket.
I_1_
Too much air
pressure causes a
hazardous risk of bursting. Check
the manufacturer's
maximum
pressure rating for air tools and
accessories,
The regulator outlet
pressure must never exceed the
maximum pressure rating.
}-low to Start:
1.
Turn the On/Auto/Off
lever to
"AUTO" and allow tank pressure
to build,
Motor will stop when
tank pressure reaches "cut-out"
pressure.
2,
Pull the regulator
knob out and
turn clockwise
to increase
pressure.
Whet_ the desired
pressure
is reached
push knob
in
to lock in place, The compressor
is ready for use.
NOTE; Always operate the air
compressor in well-ventilated areas
free of gasoline or olher combustible
vapors, If the compressor isbeing
used to op_rate a sprayer DO NQT
place near the sprayarea.
D_6336
14- ENG
Advertisement
Table of Contents
