Step 3: Connect The Modem To Your System; Rs232 Connection; Line Connection - Multitech MultiModem DSVD MT5600DSVD User Manual

MultiModemDSVD User Guide

Step 3: Connect the Modem to Your System

Placing the modem in a convenient location, connect it to your computer's serial
port, to the telephone line, to AC power, and, optionally, to your telephone. For
voice operations, connect it to the supplied headset or, optionally, to a microphone
and a speaker or sound card.
Note: Do not turn on the modem until you have made all the connections.
Figure 2-3. Modem connections.

RS232 Connection

Plug one end of the serial cable into the RS232 connector on the modem, and the oth-
er end into a serial port connector on your computer, such as COM1 or COM2.

Line Connection

Plug one end of the phone cable into the modem's LINE jack, and the other end into
a phone line wall jack.
Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug the
phone into the LINE jack or the line cable into the PHONE jack.
2 Installation
9