Led Indicator - National Instruments 9211A User Manual

Mounting the USB-9211/9211A to a Panel
Connecting the USB-9211/9211A to a Computer

LED Indicator

USB-9211/9211A User Guide and Specifications
Threaded inserts are located in the USB-9211/9211A for mounting it to a
panel. Refer to Figure 5 for dimensions.
85.7 mm
(3.37 in.)
72.2 mm
(2.84 in.)
Plug one end of the USB cable into the USB-9211/9211A and the other end
into an available USB port on the computer.
The LED indicator indicates device status.
LED State
Not lit
On, not blinking
Single-blink
Double-blink
Quadruple-blink
Threaded Insert
M3 x 0.5
8.5 mm (0.34 in.) Max Depth
76.1 mm
(3.00 in.)
Figure 5. Module Dimensions
Table 2. LED State/Device Status
Device Status
Device not connected or in suspend.
Device connected, but no module installed.
Operating normally.
Operating normally.
Device error. Refer to
6
.
ni.com/support
ni.com