Extending/Replacing The Main Memory - Fujitsu PRIMERGY RX200 S5 Options Manual

Extending/replacing the main memory

6.2 Extending/replacing the main memory
Ê Open the server as described in
Ê Lift the air cowl upwards to remove it as described in
air cowl" on page
Removing installed memory modules
1
Figure 13: Removing a memory module
Ê Fold the ejection levers outwards on both sides of the corresponding slot (1).
This will cause the memory module installed in the slot to be ejected.
Ê If the slot was already equipped: Remove the memory module (2).
34
chapter "Preparation" on page
22.
Options Guide
section "Removing the
2
Main memory
19.
1
RX200 S5