Power Supply - Foxconn 661M03 Series User Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
20-pin ATX power connector: PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply cable
and pins are properly aligned with the connector on the motherboard. Firmly plug
the power supply cable into the connector and make sure it is secure.
4-pin ATX_12V Power Connector: PWR2
The ATX power supply connects to PWR2 and provides power to the CPU.
Attention
You have to press the power button for more than four seconds if
you change the default "Instant Off" setting to "Delay 4 Sec" from
the "Power Button Override" option in the BIOS Power Manage-
ment Setup.
Chapter 2
4-pin ATX_12V power connector
12V
GND
20
10
661M03 Series User Manual
Installation Instructions
4 3
12V
GND
2 1
20-pin ATX power connector
5V GND GND GND 3.3V
5 V
-5V GND PS-ON -12V
12V PWR_OK 5V 5V 3.3V
5VSB GND GND GND 3.3V
11
1
17