Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Foster Abstract
Summary of Contents for Foster Abstract
- Page 1 USER'S MANUAL FOR GAS COOKER HOBS Abstract Foster via M.S. Ottone, 18/20 42041 Brescello (RE) - Italy tel. +39.0522.687425 - tel. Servizio Assistenza +39.0522.684450 fax +39.0522.686019 - fax Servizio Ricambi +39.0522.962166 e-mail: service@fosterspa.com www.fosterspa.com...
-
Page 2: Table Of Contents
Dear Customer, We thank you for having chosen a Foster cooker hob. Your preference is our pride and satisfaction. In this document are the recommendations and instructions that will enable you to make the best use of the purchased cooker hob and guarantee its best preservation in time. We ask that you take a few minutes to protect the efficiency of the product and for your satisfaction. -
Page 3: Usage Warnings
GENERAL WARNINGS Usage warnings This manual is and integral part of this appliance. It is necessary to keep it undamaged and on hand for the entire life cycle of the hob. We recommend carefully reading this document and all instructions contained within before using the appliance. Installation must be completed by qualified personnel according to current standards. -
Page 4: Safety Warnings
GENERAL WARNINGS Safety warnings In your interest and for your safety, by law it has been established that instal- lation and service for all electric or gas appliances must be carried out by qualified personnel, according to current regulations and the require- ments of local companies supplying gas and electric power. -
Page 5: Know Your Appliance
Know your appliance All drawings relating to the Foster cooker hobs manufactured today, are at the end of this manual, Gas cooker hobs summary Page 182 We ask that you recognise the drawing of the cooker hob you have purchased to familiarise with the main technical-functional features. -
Page 6: Installer Instructions
INSTALLER INSTRUCTIONS First installation Do not leave packaging material waste unguarded in the household environment. Separate the various packaging waste materials and deliver them to the closest selective waste collection centres. In order to remove all manufacturing residues, we recommend cleaning the appliance. For further information on cleaning see Chapter 15 Page 37] Positioning in the work top... - Page 7 INSTALLER INSTRUCTIONS • The distance of the cooker hob from the back edge must be at least 50 mm; • The distance of the cooker hob from the walls that exceed worktop height must be at least 100 mm; • Make sure that there is a minimum distance of 750 mm from the burner to any shelf placed vertically above it;...
-
Page 8: Fastening The Cooker Hob To The Cabinet
INSTALLER INSTRUCTIONS • Accurately clean milling. • Before positioning the top, lay the sealer gasket provided on the entire milling surface [ Fig. 5 • Once these operations have been completed, use the supplied brackets to fasten the hob to the structure. Re- fer to the “Fastening the cooker hob to the cabinet”... - Page 9 INSTALLER INSTRUCTIONS Fixed hooks They make it possible to fasten the cooker hob using fixing frames pre-set along specific points. Standard edge (8 mm) Q4 edge (4 mm) Semi-flush edge (3 mm) Flush-mount edge...
- Page 10 INSTALLER INSTRUCTIONS Set hook B in frame A welded to the hob, making sure that it is blocked in the spe- cific holes based on top thickness (for a 30 mm thick top, lock the hook in the the highest hole in the frame; for a 40 mm thick top, block the hook in the lowest hole of the frame).
-
Page 11: Connecting The Cooker Hob To The Gas Network
INSTALLER INSTRUCTIONS Fixed brackets Make it possible to fasten the cooker hob in pre-set fastening points. Standard edge (8 mm) Introduce the bracket B in appropriate top seat. Manually lock the bracket using screw A. Connecting the cooker hob to the gas network It is necessary for the gas supply system to conform to local regulations in force. -
Page 12: Room Ventilation
INSTALLER INSTRUCTIONS IMPORTANT: Always place the gasket between the hob fitting and the connection pipe. • If using a stainless steel flexible pipe, it must be installed so that it does not come in contact with any part of the cabinet, but passes through an unoccupied area where its entire length can be inspected. -
Page 13: Discharging Combustion Products (Exhaust)
INSTALLER INSTRUCTIONS INSTALLER INSTRUCTIONS 10. Discharging combustion products (exhaust) Discharge of combustion products must be ensured through hoods connected to an efficient natural draught flue, or through a forced exhaust. An efficient exhaust system requires an accurate design by a specialist that is ap- proved for this work, following positions and distances contained in regulations. - Page 14 INSTALLER INSTRUCTIONS Rated Rated con- Injector Burner capacity sumption rated capacity type Series No. Ref. (KW) (l/h) (ø mm) (KW) Auxiliary 1,00 0,72 0,52 Semi-quick 1,75 0,97 0,52 Quick 2,70 1,08 0,90 Triple crown 3,50 1,35 1,80 Dual 4,50 i 0.72 / and 1.02 i 0.46 / and 0.66 Auxiliary 1,10 0,73...
-
Page 15: Adjustment Of The Minimum
INSTALLER INSTRUCTIONS IMPORTANT: After adjusting for use with a gas that is different from the initial testing one, replace the label on appliance housing with the one that corresponds to the new gas type. 12. Adjustment of the minimum Instructions for urban and methane gas 1. -
Page 16: User Instructions
USER INSTRUCTIONS It is mandatory to have an earth connection as per modes foreseen in the electrical system safety standards. • If using a fixed connection, it is necessary to pre-set an omnipolar interruption device on the appliance power supply line with a contacts distance that is equal to or greater than 3 mm, located in a position that can be reached easily and is in proximity of the appliance. - Page 17 USER INSTRUCTIONS USER INSTRUCTIONS The upper cover (B) of the burners must be placed in opposite seat with the two intro- ductions notches in correspondence of the two cylinders below (C) and tighten clock- wise. The associated burner is indicated near each knob. The appliance is equipped with an electric ignition device.
- Page 18 USER INSTRUCTIONS 14.2 Practical recommendations for burner use For better burner yield, and minimum gas consumption, it is necessary to use fl at and regular bottom pots, equipped with a cover and proportioned to the burner, in order to avoid that the fl ame goes up their sides (see the “Pots diameter”...
-
Page 19: Cleaning And Maintenance
Foster S.P.A. will not answer for the possible inaccuracies contained in this manual attributable to printing or transcription errors. The right is reserved to make amendments to own products considered necessary or... -
Page 20: Gas Cooker Hobs Summary
Riepilogo piani cottura a gas Legenda Tipo di bordo Serie Bruciatore Potenza (W) Bordo standard (8 mm) Manopola di comando Bordo Q4 (4 mm) Ausiliario 1.000 Semirapido 1.750 Bordo semifilo (3 mm) Rapido 2.700 Bordo filotop Tripla corona 3.500 Dual 4.500 Fori da incasso Ausiliario... - Page 21 4000 N7272V N7272V 10.5 A = 1160 mm B = 480 mm 1221 1200 R10.5 N7252V N7252V 10.5 A = 860 mm B = 480 mm R10.5 N7270V N7270V 10.5 A = 860 mm B = 480 mm R10.5...
- Page 22 N7253V N7253V 10.5 A = 830 mm 480 mm R10.5 N7251V N7251V 10.5 A = 560mm B = 480 mm R10.5 N7254V N7254V A = 1159 mm B = 348 mm 1180 1162 R10.5 N7254V A = 1162 B = 351 mm...
- Page 23 N7278V-AEO A = 430 mm B = 480 mm N7277V A = 430 mm B = 480 mm N7276V-AEO A = 360 mm B = 480 mm...
- Page 24 QUADRA N7214V N7215V A = 1162 mm B = 351 mm 1180 1162 R10.5 N7211V N7211V A = 862 mm B = 351 mm R10.5 N7221V N7221V A = 309 mm B = 454 mm...
- Page 25 N7223V N7223V A = 309 mm B = 454 mm 157.8 N7238V 955.5 R10.5 N7238V 157.8 R10.5 R9.5 955.5 973.5...
- Page 26 N7600VKE N7603VKE A = 840 mm B = 480 mm R10.5 N7600VKE N7600VKE A = 770 mm B = 480 mm N7610V A = 770 mm B = 480 mm N7615V A = 560 mm B = 480 mm...
- Page 27 PROFESSIONALE N7055V-10 N7055V-10 N7055V-10 A = 840 mm B = 480 mm R10.5 N7053V-10 N7053V-10 A = 560 mm B = 480 mm R10.5 N7062V-08 A = 270 mm B = 480 mm...
- Page 28 N7061V-08 A = 270 mm B = 480 mm LISA 828.8 N7290V 506.8 R161 R93.5 200.5 842.8 N7290V 828.8 506.8 R1269.5 R168 R161 R93.5 R100.5 200.5...
- Page 29 FAUST N7047VFT1 N7075V N7048V A = 770 mm B = 480 mm R10.5 ELEONORA N7095V N7295V A = 770 mm B = 480 mm R135 N7296VFT R152...
- Page 30 VULCANO N7297V N7097V A = 950 mm B = 480 mm R152 1.10 VERONIKA N7067V A = 560 mm B = 480 mm N7066V A = 560 mm B = 480 mm...
- Page 31 N7063V A = 420 mm B = 480 mm N7367V R152 N7266V R152...
- Page 32 1.11 ELETTRA - PANDORA N7064V A = 560 mm B = 480 mm N7065V A = 560 mm B = 480 mm 1.12 MAGIC N7044V N7024V A = 740 mm B = 480 mm R152...
- Page 33 N7021V A = 740 mm B = 480 mm N7042V N7023V A = 560 mm B = 480 mm R152 1.13 ALIEN N7017VA A = 840 mm B = 480 mm...
- Page 34 1.14 ANGOLARE N7038V 20x45° 1.15 F2000 N7053000V A = 560 mm B = 480 mm N7055000V A = 840 mm B = 480 mm...
- Page 35 1.16 RONDÒ - GIOTTO N7052V Ø 500 mm N7051VG Ø 500 mm 1.17 ALFA N7260V N7260V N7260V A = 840 mm B = 480 mm R10.5...