Profiles; Parameter Access - Foster RBC20-60 Service Manual

Profiles.

You are now in the program profiles. The controller has 9 operating programs – Pre Chill, Soft Chill, Hard Chill, Hard Chill
Max, Shock Freeze, Professional 1, Professional 2, Professional 3, Defrost and 2 optional programs – UV Sanitisation
and Information. These programs are all available depending upon which of the profiles are selected, see below.
To change the profile rotate the dial to select program, press and release the dial to accept the change. The 3 chevrons in
the box opposite the selected program confirm the change.
The default operating profile for the RBC20-60 and RBC20-60R is 'LE CHEF'.
The table identifies which programs are available from the profile with 'LE CHEF' highlighted.
PROGRAMS
PRE CHILL
SOFT CHILL
HARD CHILL
HARD CHILL MAX
SHOCK FREEZE
PROFESSIONAL 1
PROFESSIONAL 2
PROFESSIONAL 3
DEFROST
UV SANITISATION
INFORMATION

Parameter Access.

From the profile screen once the selection has been made press and release the dial to access the parameter list. The
screen will display the parameters as shown in the screen below left. To access the system parameters rotate the dial
anticlockwise see below right.
Selection is made by pressing and releasing the dial.
The table below contains the complete parameter list and includes the selectable range and default values.
Parameters
PARAMETER
PO1
PO2
PO3
PO4
PO5
PO6
PO7
PO8
PO9
P10
P11
P12
P13
SIMPLE SIMPLE +
OPTIONAL OPTIONAL
OPTIONAL OPTIONAL
DESCRIPTION
PRE-CHILL
AIR TEMP
CHILL TIME
HOLD TEMP
SOFT-CHILL
AIR TEMP
CHILL TIME
CHILL TEMP
HOLD TEMP
HARD CHILL
AIR TEMP
CHILL TIME
CHILL TEMP
HOLD TEMP
CHANGE TIME
CHANGE TEMP
PROFILES
CHEF CHEF+
OPTIONAL OPTIONAL
OPTIONAL OPTIONAL
VALUE MINIMUM MAXIMUM
°C -15
MINUTES 5
°C -10
°C -10
MINUTES 5
°C -5
°C -5
°C -20
MINUTES 5
°C -15
°C -15
% 5
% 5
9
LE CHEF EXPERT
OPTIONAL OPTIONAL
OPTIONAL OPTIONAL
DEFAULT
15 -10
60 15
15 3
15 1
480 90
15 3
15 3
15 -15
480 90
15 3
15 3
95 80
95 80
EXPERT+
OPTIONAL
OPTIONAL