Dynex DX-46L260A12 User Manual page 13

Making connections
Using component video (better)
To connect a cable or satellite box using component video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable box.
3 Connect a component video cable (not included) to the Y, P
P jacks on the back of your TV and the component video out
R
jacks on the cable or satellite box.
Back of TV
COMPONENT IN
4 Connect an audio cable (not included) to the L and R audio jacks
on the back of your TV and to the audio out jack on the cable or
satellite TV box.
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
Your TV has a digital audio jack, so you can connect
the video to the component video jacks and connect
the audio to the digital audio jack to get digital audio
output.
5 Turn on your TV, then turn on the cable or satellite box.
6 Go through the setup wizard on page 16.
, and
B
Cable or satellite box
Audio cable
Component video cable
Using composite video (good)
To connect a cable or satellite box using composite video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable box.
3 Connect an A/V cable (included) to the AV IN jacks on the back of
your TV and to the composite video and audio out jacks on the
cable or satellite box.
Back of TV
Cables are often
color-coded to match
color-coded jacks.
4 Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 16.
9
DX-46L260A12
Cable or satellite box
A/V cable
COMPONENT IN