Lighting Instructions - Napoleon BIPRO 600 User Manual

Lighting Instructions

Lighting Hole
Igniter
WARNING!
Open lid
WARNING!
Ensure all burner controls are in the off position. Slowly turn on the gas
supply valve.
Main Tube Burner
Lighting
1. Open grill lid.
2. Turn left burner control to
high position.
3. Press and hold igniter
button until burner lights, or
light by match.
4. If ignition is not immediate,
turn burner control off. Wait
5 minutes.
Repeat.
5. With left tube burner
operating on high, turn the
center and/or right tube
burner to high.
WARNING!
The propane cylinder is equipped with an excess flow device. Unless all burners are turned
off prior to turning the cylinder on, only small flames and low heat will be achievable.
WARNING!
Do not use rear burner while operating main burner.
WARNING!
If lighting the unit with a match, clip the match into the supplied lighting rod.
Hold the lit match down through the grill and sear plate while turning the corresponding
burner valve to high.
Left Tube Center Tube Rear Burner Right Tube
Burner Burner
Rear Burner Lighting
1. Open grill lid.
2. Remove warming rack.
3. Turn rear burner control to
high position. button until burner lights, or
4. Press and hold igniter button 4. If ignition is not immediate,
until burner lights, or light by turn burner control off. Wait
match.
5. If ignition is not immediate,
turn burner control off. Wait
5 minutes.
Repeat.
Main Infrared
Burner Burner
Off Position
Main Infrared Burner
Lighting
1. Open grill lid.
2. Turn infrared burner con- 2. Turn side burner control to
trol to high position.
3. Press and hold igniter
light by match.
5 minutes.
Repeat.
7
Side Burner Lighting
(optional)
1. Open burner cover.
high position.
3. Press and hold
igniter button until burner
lights, or light by match
4. If ignition is not
immediate, turn burner
control off. Wait 5 minutes.
Repeat.
www.napoleongrills.com