Napoleon BIPRO 500 User Manual

Napoleon BIPRO 500 User Manual

Hide thumbs Also See for BIPRO 500:
Table of Contents

Advertisement

Available languages

Available languages

This gas grill must be used only outdoors in a well-ventilated space and must not be used inside a
building, garage, screened-in porch, gazebo or any other enclosed area.
WARNING!
CABINET FRAME, CABINET AND COUNTER TOP MUST BE MADE FROM NON-COMBUSTIBLE MATERIAL.
DANGER
IF YOU SMELL GAS:
• Shut off gas to the appliance.
• Extinguish any open flame.
• Open lid.
• If odor continues, keep away from the
appliance and immediately call your gas
supplier or fire department.
Adults and especially children should be alerted to the hazards of high surface temperatures.
Notice to Installer: Leave these instructions with the grill owner for future reference.
Customer Solutions: 1-866-820-8686 or
N415-0251 JAN 28.15
Young children should be supervised near the gas grill.
Napoleon Group of Companies
214 Bayview Dr., Barrie, Ontario, Canada L4N 4Y8
Phone: 1-705-726-4278 Fax: (705)-725-2564
www.napoleongrills.com
APPLY SERIAL NUMBER LABEL FROM CARTON
Serial No.
XXXXXX000000
MODEL NO.
BIPRO 500
WARNING
Do not try to light this appliance without
reading the "LIGHTING" instructions section
of this manual.
Do not store or use gasoline or other
flammable liquids or vapors in the vicinity of
this or any other appliance. An L.P. cylinder
not connected for use must not be stored in
the vicinity of this or any other appliance.
If the information in these instructions is
not followed exactly, a fire or explosion may
result, causing property damage, personal
injury or death.
grills@napoleonproducts.com
EN
FR
PG.29

Advertisement

Table of Contents
loading

Summary of Contents for Napoleon BIPRO 500

  • Page 1 Adults and especially children should be alerted to the hazards of high surface temperatures. Young children should be supervised near the gas grill. Notice to Installer: Leave these instructions with the grill owner for future reference. Napoleon Group of Companies 214 Bayview Dr., Barrie, Ontario, Canada L4N 4Y8 Phone: 1-705-726-4278 Fax: (705)-725-2564 www.napoleongrills.com...
  • Page 2: Conditions And Limitations

    NAPOLEON will not be responsible for the installation, labor or any other costs or expenses related to the re- installation of a warranted part, and such expenses are not covered by this warranty.
  • Page 3: Safe Operating Practices

    WARNING! Failure to follow these instructions could result in property damage, personal injury or death. Read and follow all warnings and instructions in this manual prior to operating grill. Safe Operating Practices • This gas grill must be assembled exactly according to the instructions in the manual. If the grill was store assembled, you must review the assembly instructions to confirm correct assembly and perform the required leak tests before operating the grill.
  • Page 4: General Information

    General Information This Gas Barbecue Is Certified Under Canadian And American National Standards, CSA 1.6b-2012 and ANSI Z21.58b-2012 respectively for Outdoor Gas Grills and should be installed to conform with local codes. In absence of local codes, install to the current CAN/CSA-B149.1 Propane Installation Code in Canada or to the National Fuel Gas Code, ANSI Z223.1 in the United States.
  • Page 5 The installation must comply with CAN B149.1 Natural Gas and Propane installation code in Canada, or to the National Fuel Gas code, ANSI Z223.1 in the United States. The gas supply pipe must be sufficiently sized to supply the BTU/h specified on the rating plate, based on the length of the piping run. If installing a side burner, a separate line must be branched off to the side burner unit and enter the side burner opening at the specified location.
  • Page 6: Leak Testing Instructions

    Bubbles will indicate a gas leak. Either tighten the loose joint or have the part replaced with one recommended by the Napoleon Customer Solutions department and have the grill inspected by a certified gas installer. If the leak cannot be stopped, immediately shut off the gas supply, disconnect it, and have the grill inspected by a certified gas installer or dealer.
  • Page 7: Lighting Instructions

    Lighting Instructions Lights Left Left Centre Rear Right Centre Right Burner Burner Burner Burner Burner Igniter Off Position WARNING! Open lid WARNING! Ensure all burner controls are in the off position. Slowly turn on the gas supply valve. Main Burner Rear Burner Lighting Side Burner Lighting Lighting...
  • Page 8: Cooking Instructions

    This may cause the control panel to become extremely hot to touch and the knobs to deform. Napoleon offers an optional wind deflector illustrated below. Install this wind deflector to help prevent the possibility of improper heat build up.
  • Page 9 For example, a 3 pound chicken on the rotisserie will be done in approximately 1½ hours on medium to high. See ‘Your all Season Grill’ cookbook by Napoleon for more detailed instructions.
  • Page 10: Cleaning Instructions

    Cleaning The Outer Grill Surface: Do not use abrasive cleaners or steel wool on any painted, porcelain or stainless steel parts of your Napoleon Grill. Doing so will scratch the finish. Exterior grill surfaces should be cleaned with warm soapy water while the metal is still warm to the touch. To clean stainless surfaces, use a stainless steel or a non-abrasive cleaner.
  • Page 11: Maintenance Instructions

    Maintenance Instructions We recommend this gas grill be thoroughly inspected and serviced annually by a qualified service person. At all times keep the gas grill area free from combustible materials, gasoline and other flammable vapors and liquids. Do not obstruct the flow of ventilation and combustion air. Keep the cylinder enclosure ventilation openings (located on the cart sides and at the front and back of the bottom shelf) free and clear from debris.
  • Page 12 Regulator Hose (when applicable): Check for abrasions’, melting, cuts, and cracks in the hose. If any of these conditions exist, do not use the gas grill. Have the part replaced by your Napoleon Gas Grill dealer or qualified gas installer.
  • Page 13: Troubleshooting

    Troubleshooting Problem Possible Causes Solution Low heat / Low flame For propane - improper lighting Ensure lighting procedure is followed carefully. when valve turned to procedure. All gas grill valves must be in the off position high. when the tank valve is turned on. Turn tank on slowly to allow pressure to equalize.
  • Page 14 Cracked ceramic tile. Allow burner to cool and inspect very closely for cracks. If any cracks are found, contact your authorized Napoleon dealer to order a replacement burner assembly. Leaking gasket surrounding the ceramic Contact your authorized Napoleon dealer for...
  • Page 15: Ordering Replacement Parts

    KEEP YOUR RECEIPT AS PROOF OF PURCHASE TO VALIDATE YOUR WARRANTY. Ordering Replacement Parts Warranty Information MODEL: DATE OF PURCHASE: SERIAL NUMBER: (Record information here for easy reference) Before contacting the Customer Care Department, check the NAC Website for more extensive cleaning, maintenance, troubleshooting and parts replacement instructions at www.napoleongrills.com.
  • Page 16: Getting Started

    CAUTION! During unpacking and assembly we recommended you wear work gloves and safety glasses for your protection. Although we make every effort to make the assembly process as problem free and safe as possible, it is characteristic of fabricated steel parts that the edges and corners might be sharp and could cause cuts if handled incorrectly.
  • Page 17 BUILT-IN UNIT OPENING DIMENSIONS MODEL OPENING DIMENSIONS NOTES BIPRO500 30 3/4” 20 5/8” 8 7/8” 781mm 524mm 225mm SIDE BURNER 12 3/4” 16 1/2” 4 1/2” OPENING OF AT LEAST 5 SQ IN MUST BE PROVIDED FOR COMBUSTION 324mm 419mm 114mm AIR FOR SIDE BURNER.
  • Page 18 BUILT-IN ACCESSORY OPENING DIMENSIONS Opening Dimensions Part # Description Picture N370-0069 Flat Vertical Painted Door 13 ¼” (337mm) 18 ¼” (464mm) N370-0071 Flat Vertical Stainless Door 13 ¼” (337mm) 18 ¼” (464mm) N370-0070 Flat Horizontal Painted Door 18 ¼” (464mm) 13 ¼”...
  • Page 19 Opening Dimensions Part # Description Picture N370-0360 Pf Style Stainless Steel Triple 17 ¼” (438mm) 22 ¾” (578mm) 23” (584mm) Drawer N370-0502 Double Door Small 28 ¼” (718mm) 20 ¼” (514mm) 37 ¾” (959mm) 20 ¼” (514mm) N370-0503 Double Door Large * Frames Protrude From Face Of ¾”...
  • Page 20 BI ACCESSORY DRAWER INSTRUCTIONS 1. Unpack the drawer frame assembly. 2. Remove the drawers from the enclosure by fully extending them and then lifting up to remove them from the slides. 3. Shim the opening to ensure that the enclosure fits snuggly into the opening. Ensure that the side shims are located at the same height as the enclosure mounting holes.
  • Page 21 BIPRO500 BUILT-IN INSTRUCTIONS (Pre-installed at factory.) 3/8”(10mm) 4 x N570-0087 (1/4 -20 X 7/8”) 2 x N570-0086 (#14 X1/2”) This grill is designed for masonry, NON-COMBUSTIBLE enclosures only, and must be installed and serviced by a qualified installer to local codes. 1.
  • Page 22 www.napoleongrills.com...
  • Page 23 Bubbles will indicate a gas leak. Either tighten the loose joint or have the part replaced with one recommended by the Napoleon Customer Solutions department and have the grill inspected by a certified gas installer. If the leak cannot be stopped, immediately shut off the gas supply, disconnect it, and have the grill inspected by a certified gas installer or dealer.
  • Page 24 Rotisserie Kit Assembly Instruction (optional) Assemble rotisserie kit components as shown. Ensure stop bushing is tightened on the inside of hood casting. www.napoleongrills.com...
  • Page 25 www.napoleongrills.com...
  • Page 26 N715-0092 right side lid casting N335-0069 stainless steel lid insert N585-0080 lid heat shield N010-0725 lid handle N385-0191 NAPOLEON logo N450-0044 logo spring clips N510-0013 black silicone lid bumper N080-0253G lid handle cover N570-0013 #8 x 5/8” screw N570-0015...
  • Page 27 Parts List Item Part # Description N570-0068 #14 x 1/2” screw stn stl N475-0299 control panel N555-0025 lighting match rod N010-0723 drip pan N585-0083 heat shield N010-0281 manifold flex connector W445-0031 union fitting 3/8” - 3/8” N570-0087 1/4-20 x 7/8” screw N660-0002 switch light N750-0021B...
  • Page 28 Notes www.napoleongrills.com...
  • Page 29 à des températures élevées. Surveillez les jeunes enfants lorsqu’ils sont près du gril. Note à l’installateur : Laissez ces instructions au propriétaire du gril pour consultation ultérieure. Napoleon Group of Companies 214 Bayview Dr., Barrie, Ontario, Canada L4N 4Y8 Phone: 1-705-726-4278 Fax: (705)-725-2564 www.napoleongrills.com...
  • Page 30 Les grils à gaz NAPOLÉON sont fabriqués conformément aux normes strictes du Certificat d’assurance de qualité mondialement reconnues ISO 9001-2008. Les produits NAPOLÉON sont conçus avec des composantes et des matériaux de qualité supérieure, assemblés par des artisans qualifiés qui sont fiers de leur travail. Le brûleur et le montage de la soupape subissent un test de détection de fuites et d’allumage à...
  • Page 31 AVERTISSEMENT! Si ces instructions ne sont pas suivies, des dommages matériels, des blessures corporelles ou des pertes de vie pourraient s’ensuivre. Lisez et respectez tous les avertissements et les instructions de ce manuel avant de faire fonctionner le gril. Pratiques Sécuritaires D’utilisation •...
  • Page 32: Information Générale

    Information Générale Ce gril à gaz est certifié selon les normes nationales Canadiennes et Américaines, CSA 1.6b-2012 et ANSI Z21.58b-2012 respectivement pour des grils a gaz pour l’exterieur et son installation devrait être conforme aux codes locaux. En l’absence de codes locaux, installez selon les normes courantes CAN/CSA-B149.1 du code d’installation de Propane au Canada ou selon les normes ANSI Z223.1 du “National Fuel Gas”...
  • Page 33 rigide, du tuyau de cuivre ou un raccord métallique flexible approuvé qui se conforme aux normes Z21.24 /CSA 6.10 ou ANSI Z21.75/CSA 6.27. L’installation doit se conformer au Code d’installation du gaz naturel et du propane CAN B149.1 au Canada ou au National Fuel Gaz Code ANSI Z223.1 aux États-Unis.
  • Page 34 BRANCHEMENT DU GRIL ENCASTRÉ AU GAZ NATUREL: La tuyauterie jusqu’au gril à gaz est la responsabilité de l’installateur et doit être positionnée comme illustré dans le manuel d’instructions du gril encastré. Un raccord flexible métallique est inclus afin de faciliter l’installation de l’appareil. Branchez ce raccord au raccord évasé...
  • Page 35: Instruction D'allumage

    Instruction D’allumage Lumières Bruleur Brûleur de Brûleur de Brûleur de Brûleur de droite centre d’arriere droite gauche gauche centre Bouton d’allumeur Fermez AVERTISSEMENT! Ouvrez le couvercle AVERTISSEMENT! Fermez tous les boutons de contrôle des brûleurs, ouvrez la soupape d’alimentation en gaz lentement. Allumage du brûleur principal Allumage du brûleur arrière.
  • Page 36: Instructions D'opération

    Instructions D’opération Éclairage initial: Lorsqu’il est allumé pour la première fois, le gril dégagera une légère odeur. Ceci est un phénomène normal et temporaire causé par l’évaporation des peintures et lubrifiants internes utilisés dans le processus de fabrication et ne se reproduira plus. Allumez simplement les brûleurs de cuve à “high”...
  • Page 37 Gardez le couvercle ouvert. Pour des instructions plus détaillées, veuillez consulter le “Livre de recettes toutes saisons” de NAPOLEON. Cuisson Directe: Placez les aliments à cuire sur la grille de cuisson, directement au-dessus de la chaleur.
  • Page 38 Le fini émaillée étant cuit il devient comme du verre; il s’ébrèchera au moindre choc. Vous pouvez vous procurer de la peinture émaillée pour les retouches chez votre détaillant NAPOLEON. Utilisez une solution d’eau savonneuse chaude pour nettoyer l’extérieur du gril pendant qu’il est encore tiède au toucher.
  • Page 39: Instructions D'entretien

    Instructions D’entretien Nous vous conseillons de faire inspecter ce gril à gaz annuellement par un technicien de service qualifié. L’emplacement du gril à gaz doit être gardé libre de tous matériaux combustibles, essence ou autres liquides et vapeurs inflammables en tout temps. Les apports d’air comburant et d’air de ventilation ne doivent pas être obstrués.
  • Page 40 Boyau (si applicable): Vérifiez l’usure, coupures, craquelures ou s’il est fondu. Si vous découvrez une de ces défectuosités, n’utilisez pas votre gril. Faites remplacer la pièce par votre détaillant NAPOLEON ou par un installateur qualifié. Moulages En Aluminium: Nettoyez les moulages périodiquement à l’aide d’une solution d’eau savonneuse chaude.
  • Page 41: Guide De Dépannage

    Guide De Dépannage Problème Causes possibles Solutions Faible chaleur/petite flamme Pour le propane - procédure Assurez-vous que la procédure d’allumage est lorsque le bouton de contrôle d’allumage incorrect. suivie à la lettre. Tous les boutons de contrôle du est à “high”. gril doivent être fermés lorsque vous ouvrez la soupape de la bonbonne.
  • Page 42 Problème Causes possibles Solutions Les brûleurs ne s’allument Sales ou corrodés supports Nettoyez ou remplacez au besoin. pas les uns aux autres. légers croix. La peinture semble peler à Accumulation de graisse sur les Ceci n’est pas un défaut. Le fini du couvercle est l’intérieur du couvercle.
  • Page 43: Commande De Pièces De Rechange

    GARDEZ VOTRE REÇU COMME PREUVE D’ACHAT POUR VALIDER VOTRE Commande De Pièces De Rechange Information Sur La Garantie MODÈLE: DATE D’ACHAT: NUMÉRO DE SÉRIE: (Inscrivez l’information ici pour y avoir accès facilement.) Avant de contacter le département du service aux consommateurs, consultez le site Web de NAC pour obtenir plus d’instructions sur le nettoyage, l’entretien, le dépannage et le remplacement des pièces à...
  • Page 44: Pour Commencer

    ATTENTION! Lors du déballage et de l’assemblage, nous vous conseillons de porter des gants de travail et des lunettes de sécurité pour votre protection. Malgré tous nos efforts pour assurer que l’assemblage soit aussi sécuritaire et sans problème que possible, il se peut que les bords et les coins des pièces usinées en acier soient coupants et qu’ils causent des coupures si les pièces ne sont pas manipulées correctement.
  • Page 45 DIMENSIONS D’OUVERTURE POUR LES GRILS ENCASTRÉS MODÈLE DIMENSIONS DE L’OUVERTURE NOTES BIPRO500 30 3/4” 20 5/8” 8 7/8” 781mm 524mm 225mm BRÛLEUR 12 3/4” 16 1/2” 4 1/2” PRÉVOIR UNE OUVERTURE D’AU MOINS 5 PO² POUR L’AIR DE VENTILATION LATÉRAL 324mm 419mm 114mm...
  • Page 46 DIMENSIONS D’OUVERTURE POUR LES ACCESSOIRES DIMENSIONS D’OUVERTURE N° DE PIÈCE DESCRIPTION ILLUSTRATION N370-0069 PORTE VERTICALE PEINTE 13 ¼” (337mm) 18 ¼” (464mm) N370-0071 PORTE VERTICALE EN ACIER 13 ¼” (337mm) 18 ¼” (464mm) INOXYDABLE N370-0070 PORTE HORIZONTALE PEINTE 18 ¼” (464mm) 13 ¼”...
  • Page 47 DIMENSIONS D’OUVERTURE N° DE PIÈCE DESCRIPTION ILLUSTRATION N370-0360 TIROIR TRIPLE EN ACIER INOXYDABLE 17 ¼” (438mm) 22 ¾” 23” (584mm) STYLE PRESTIGE V (578mm) N370-0502 PORTE DOUBLE PETITE 28 ¼” (718mm) 20 ¼” (514mm) PORTE DOUBLE GRANDE 37 ¾” (959mm) 20 ¼”...
  • Page 48 INSTRUCTIONS D’INSTALLATION DES TIROIRS 1. Déballez l’assemblage du cadre et des tiroirs 2. Retirez les tiroirs du cadre en les ouvrant complètement puis en les soulevant pour les retirer des glissières. 3. Placez des cales pour vous assurer que le cadre soit bien ajusté dans l’ouverture. Assurez-vous que les cales soient situées à...
  • Page 49 INSTRUCTIONS POUR LE GRIL ENCASTRÉ BIPRO500 (Préinstallée en usine.) 2 x N570-0086 (#14 X1/2”) 4 x N570-0087 (1/4 -20 X 7/8”) 3/8”(10mm) Ce gril est conçu pour des cabinets INCOMBUSTIBLES OU EN MAÇONNERIE seulement et doit être installé et entretenu par un installateur qualifié...
  • Page 50 www.napoleongrills.com...
  • Page 51 TEST DE DÉTECTION DE FUITES AVERTISSEMENT! Il doit être fait avant la première utilisation, annuellement et à chaque fois qu’une pièce du système de gaz est remplacée ou réparée AVERTISSEMENT! N’utilisez pas une flamme nue pour vérifier pour des fuites de gaz. Assurez- vous qu’il n’y ait aucune étincelle ni flamme nue à...
  • Page 52 Instructions D’assemblage De L’ensemble De Rôtissoire (optionnelle) Assemblez les composantes de la rôtissoire tel qu’illustré. Assurez-vous que la bague d’arrêt soit serrée à l’intérieur de la hotte. www.napoleongrills.com...
  • Page 53 www.napoleongrills.com...
  • Page 54 N335-0069 couvercle en acier inoxydable N585-0080 couvercle pare-chaleur N010-0725 poignée du couvercle N385-0191 logo NAPOLEON N450-0044 écrous à ressort pour logo N510-0013 pare-chocs du couvercle (silicone noir) N080-0253G couverture poignée du couvercle N570-0013 vis #8 x 5/8”...
  • Page 55 Liste Des Pièces Article N° de pièce Description N475-0016 support de la rôtissorie N570-0068 vis #14 x 1/2” N475-0299 panneau de contrôle N555-0025 bâton de lumière N710-0073 tiroir d’egouttement N585-0083 pare-chaleur N010-0281 connecteur flexible du collecteur W445-0031 raccord 3/8” - 3/8” N570-0087 vis 1/4-20 x 7/8”...
  • Page 56 N415-0251...

Table of Contents