Getting Started - Napoleon LD485RB User Manual

CAUTION!
During unpacking and assembly we recommended you wear work gloves and safety glasses
for your protection. Although we make every effort to make the assembly process as problem free and
safe as possible, it is characteristic of fabricated steel parts that the edges and corners might be sharp and
could cause cuts if handled incorrectly.

Getting Started

1. Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any components
packed inside. Use the parts list to ensure all necessary parts are included.
2. Do not destroy packaging until the grill has been fully assembled and operates to your satisfaction.
3. Assemble the grill where it is to be used, lay down cardboard or a towel to protect parts from being lost or
damaged while assembling.
4. Most stainless steel parts are supplied with a protective plastic coating that must be removed prior to
using grill.
5. Follow all instructions in the order that they are laid out in this manual.
6. Two people are required to lift the grill head onto the assembled cart.
If you have any questions about assembly or grill operation, or if there are damaged or missing parts please
call our Customer Care Department at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time).
TOOLS REQUIRED FOR ASSEMBLY (tools not included)
3/8 (10mm)
Wrench,
ratchet or driver
Flat and Philips
screwdrivers
Pliers Hammer
www.napoleongrills.com
13