Gemini GEM-DXK3 Operating Manual page 30

Trouble System Trouble
Indication Condition
E19-00 User Program Memory Error
E-20-00 Dealer Program Memory Error
E-21-00 System Shutdown
E-22-NN Sensor Watch Activity Failure
E-23-00 Burglary Bus Failure
E-24 Service Message
E-27-00 Printer Failure
Receiver Capacity Error
E-39-00
E-40-NN RF Self Test Failure
E-41-NN Fire Trouble
E-51 Bell/Siren Trouble
E-58-00 Telemetry Trouble
E-59-00 Telemetry Failure
E-66-00 "Clean Me" Smoke Detector Dirty
E-99-00 Keypad Panic Shorted too Long
30
S Y S T E M T R O U B L E E R R O R C O D E S
Call installing company for service.
Call installing company for service.
Call installing company for service.
A Motion Sensor on the zone indicated has failed the programmed Sensor Watch activity test.
Insure that the sensor is able to detect activity in the area; clear any obstacles which may be
blocking the sensor from detecting activity. Press
Function Menu to Reset Sensor Watch Failure (see page 17). If you cannot correct the
problem yourself, call installing company for service.
Call installing company for service.
The system is in need of a preventive maintenance service call.
Call installing company for service.
Call installing company for service.
A wireless motion sensor on the zone indicated has failed its automatic self test routine.
Call installing company for service.
A problem has been detected on the Fire zone indicated. Call for service. (GEM-P1632 and
GEM-P816 panels only).
There is a problem with the Bell or Siren. Call installing company for service.
Call installing company for service.
Call installing company for service.
Clean detector or call installing company for service.
Call installing company for service.
Action
C to clear the display, and then use the