Gemini GEM-DXK3 Operating Manual page 16

04
INTERIOR BYPASS FIRE/TBL SYS TBL
05
INTERIOR BYPASS FIRE/TBL SYS TBL
06
INTERIOR BYPASS FIRE/TBL SYS TBL
07
INTERIOR BYPASS FIRE/TBL SYS TBL
08
INTERIOR BYPASS FIRE/TBL SYS TBL
16
F U N C T I O N M E N U
4. Display System Troubles? Displays a 1- or 2-digit error code representing a
problem detected in the system. (See SYSTEM TROUBLE ERROR CODES for a
description of these codes). Use NEXT(
CHIME
system troubles.
5. Display Fire Alarms? Displays alarms that have occurred on the Fire Zone(s).
Press the NEXT(
CHIME
6. Display Fire Troubles? Displays trouble conditions that have been detected
on the Fire Zone(s). Use NEXT(
CHIME
7. Activate Chime? The Chime Mode will sound a tone at the keypad when the
programmed zone is opened while disarmed. To deactivate the Chime Mode,
execute Function 7 once again. Note: The Chime Mode is disabled while armed.
CHIME
8. Activate Watch Mode?
This optional feature simultaneously turns on all zones designated as Day Zones,
which will cause an indication at the keypad if a zone is opened while the system
CHIME
is disarmed. To deactivate the Watch Mode, arm, then disarm. All Day Zones will
revert to regular Burglary Zones.
armed.
(For GEM-P9600/3200 panels only).
) and PRIOR (
P Q
) and PRIOR (
P
(Optional - Watch Mode programmed?
Note: The Watch Mode is disabled while
) and PRIOR (
P Q
) buttons to scroll zones.
) to scroll zones.
Q
YES
) to scroll
NO)